Cart 2 india

Specification
Brand : Atnsinc
BulletPoint1 : MAX30102 is an integrated module of heart rate monitor biosensor. It integrates a red LED with an infrared LED, a photoelectric detector, an optical device, and a low noise electronic circuit with ambient light suppression.
BulletPoint2 : LED peak wavelength: 660nm/880nm; LED power supply voltage: 3.3~5V; Detection Signal Type: Optical Reflection Signal (PPG); Output Signal Interface: I2C Interface; Communication Interface Voltage: 1.8 ~3.3V~ 5V.
BulletPoint3 : Application: MAX30102 is used in wearable equipment for heart rate and blood oxygen acquisition and detection. It is worn on fingers, earlobes and wrists.The standard I2C compatible communication interface can transmit the collected data to KL25Z and other microcontrollers for heart rate and blood oxygen calculation.
BulletPoint4 : The chip can also turn off the module by software, and the standby current is close to zero, so that the power supply can always be maintained.
BulletPoint5 : Package included:2x MAX30102 Heart Rate Sensor Module
CompatibleDevices1 : Laptop
CompatibleDevices2 : Personal Computer
ConnectivityTechnology : I2C
ConnectorType : Quick Connect
ControllerType : Push Button
ControlMethod : application
ExternallyAssignedProductIdentifier : 5039112805345
ExternallyAssignedProductIdentifier1 : 0701715460423
ExternallyAssignedProductIdentifier2 : 701715460423
IncludedComponents : 6 Row Pin
ItemName : 2Pcs Heart Rate Sensor Module MAX30102 Blood Oxygen Sensor Pulse Detection
ItemPackageDimensions_Height : 9.0932 centimeters
ItemPackageDimensions_Length : 0.7112 centimeters
ItemPackageDimensions_Width : 5.7912 centimeters
ItemPackageQuantity : 1
ItemShape : Elongated Octagonal
ItemTypeKeyword : sensor-blocks
Manufacturer : Atnsinc
Material : oxygen
MeasurementAccuracy : 0.3%
ModelName : yaohappy
ModelNumber : MAX30102
MountingType : Surface Mount
NumberOfBoxes : 1
NumberOfContacts : 4
NumberOfItems : 2
NumberOfLevels : 2
OperatingVoltage : 2.6 volts
PartNumber : 19146
ProductDescription :

Parameters:

LED peak wavelength: 660nm/880nm

LED power supply voltage: 3.3~5v

Detection Signal Type: Optical Reflection Signal (PPG)

Output Signal Interface: I2C Interface

Communication Interface Voltage: 1.8 ~ 5V

Reserve Mounting Hole Size:0.5x8.5mm/0.02x0.33Inches.

Interface:

VIN: Main power input, 1.8V-2.5V

3-bit pad: I2C bus pull up level, you can choose 1.8V or 3.3V according to the pin master voltage.

SCL: I2C bus clock

SDA: connected to the I2C bus data

INT: MAX chip interrupt pin

RD: MAX30102 chip's RD LED grounding terminal, generally doesn't need to connect

IRD: MAX30102 chip's IR LED grounding terminal, generally doesn't need to connect

GND: grounding wire

Package Included:

2x Heart Rate Sensor Module MAX30102

2x Sets of Pin Header

ProductSiteLaunchDate : 2021-05-10T08:20:07.329Z
Style : Magnet,Magnetic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 5 volts
WarrantyDescription : No warranty