Cart 2 india

Specification
Brand : Generic
BulletPoint : 1PCS GY-25A High-precision Dual-axis Tilt Analog Serial Port Tilt Detection Sensor Module Instead Of SCA60C Module
BulletPoint1 : Features :AMC1301 input voltage in the range of ±250 mv, current measurement will use shunt resistance. Low offset error and drift of 25°C ±150µV (Max), ±5µV/°C (Max). The AMC1301 has a fixed gain of 8.2. Extremely low gain error and drift of 0.5%(Max) at 25°C, ±50 ppm/°C(Max). Very low nonlinearity and drift is 0.075%(Max) at 2.4 ppm/°C. Has 3.3v high and low side operation.
BulletPoint2 : The input:The input of the AMC1301 is optimized for direct connection to shunt resistors or other low voltage level signal sources. The excellent performance of the device supports accurate current control resulting in system-level power saving and, especially in motor control applications, lower torque ripple. The AMC1301 is fully specified over the extended industrial temperature range of –40°C to +125°C
BulletPoint3 : Circuit: This circuit uses voltage divider and ±250mV differential input, differential output AMC1300B isolation amplifier for high voltage differential measurement. Because the AMC1300B is a low input impedance device, it is more suitable for current detection applications. The interaction between the input impedance of the isolation amplifier and the input voltage divider will cause the gain error.
BulletPoint4 : Application :AMC1301 is current sensing based on shunt resistance. Applications are motor control, green energy, high frequency inverter, uninterruptible power supply. The AMC130's isolated voltage sensing is used in high frequency inverters.
BulletPoint5 : Electrostatic Discharge Caution:The integrated circuit can be damaged by static electricity. It is recommended that all IC handles take appropriate precautions. Failure to follow proper operation and installation procedures can cause damage. Electrostatic damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more vulnerable to damage because very small parameter changes may cause the device to fail to meet its specifications.
Color : Gray
ConnectivityTechnology : I2C
ConnectorGender : Male-to-Male
ConnectorType : Screw
ExternallyAssignedProductIdentifier1 : 0746555549372
ExternallyAssignedProductIdentifier2 : 746555549372
ItemName : 1PCS GY-25A High-Precision Dual-axis Tilt Analog Serial Port Tilt Detection Sensor Module Instead of SCA60C Module
ItemPackageDimensions_Height : 0.7 inches
ItemPackageDimensions_Length : 7.08 inches
ItemPackageDimensions_Width : 4.72 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : sensor-blocks
Manufacturer : Generic
Material : copper
ModelNumber : VB 80-P7X9-CS12
MountingType : Surface Mount
NumberOfItems : 1
PartNumber : Lile_HFN_2943
Platform : fly
ProductDescription : Download network disk data:

Supports dynamic measurement of inclination
High-precision dual-axis inclination sensor module replaces SCA60C inclination detection sensor module
Power supply voltage: 3.3-5V,
Output voltage:
X-axis voltage output: 0-3.3V corresponds to ± 180 degrees (horizontal placement, chip up is 0V)
Y-axis voltage output: 0-3.3V corresponds to ± 90 degrees (horizontal placement, chip up is 0V)
The application is as simple as that. In addition, serial communication is supported to read data.
Module size: 15 * 13.3mm||
ProductSiteLaunchDate : 2023-11-30T05:21:55.400Z
SpecificationMet : Ma
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SystemBusStandardSupported : SATA 3
UnitCount : 1
UnspscCode : 41111900
Voltage : 120 volts
WirelessCommStandard : bluetooth