Cart 2 india
In2Cart
Rs. 0
0
Product Information
Specification
Brand : uxcell
BulletPoint : 10 Pack Pem Self-Clinching Nuts Press-In Sheet Metal Fasteners SS-024-2ZI
BulletPoint1 : Size: #10-32 x 0.18-Inch
BulletPoint2 : Material: Carbon Steel with Zinc Plating
BulletPoint3 : Outer Diameter(Max): 0.34"; Outer Diameter(Min): 0.25"; Length: 0.18"
BulletPoint4 : Suitable for a 0.1" thick mounting plate, the mounting hole diameter is about 0.17.
BulletPoint5 : Perfect for applications where a thin sheet requires load-bearing threads but still must remain smooth, with no protrusions on either surface.
Color : Silver
DriveSystem : Spline
ExteriorFinish : Zinc,Carbon Steel,Metal
ExternallyAssignedProductIdentifier1 : 0782331322531
ExternallyAssignedProductIdentifier2 : 782331322531
FinishType : Passivated
GradeRating : 304 stainless steel
ItemName : uxcell Self -Clinching Nuts,#10-32 x 0.18-Inch Carbon Steel with Zinc Plating Rivet Nut Round Head Steel Metal Sheet Mounting Hardware Fastener 100pcs
ItemPackageDimensions_Height : 13.5 centimeters
ItemPackageDimensions_Length : 1.6 centimeters
ItemPackageDimensions_Width : 9.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : self-clinching-nuts
Manufacturer : uxcell
Material : Steel
MeasurementSystem : Inch
MetalType : Stainless Steel
MetalType1 : Carbon Steel
MetalType2 : Alloy Steel
ModelNumber : a20112400ux0651
NumberOfItems : 30
PackageLevel : unit
PartNumber : a20112400ux0651
ProductDescription : Self -Clinching Rivet Nuts:
These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin sheet.
Specification:
Size:#10-32
Material: Carbon Steel with Zinc Plating
Outer Diameter(Max): 8.64mm/0.34inch;
Outer Diameter(Min): 6.32mm/0.25inch;
Mounting Hole Diameter: 6.32mm/0.25inch;
Length: 4.5mm/0.18inch;
Surface treatment: Passivation
Package Content: 100Pcs x Self -Clinching Nuts
ProductSiteLaunchDate : 2021-03-04T02:00:35.073Z
Size : #10-32x4.5mm
Style : 304 stainless steel
SupplierDeclaredDgHzRegulation : not_applicable
