Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : Ewandor
BulletPoint : Available in Black and Tan SEE ASINS: B00H3R7A0Q B01N155X0M
BulletPoint1 : ✅ A strap clip, or a strapping seal, is the means to fastens the strapping together. Designed with inside treads that securely grip polyester strapping, these joining method hold the strap in place under extreme tension once crimped on the strap. These Poly Ethylene Terephthalate seals work perfectly with manual strapping sealers/crimpers for packaging and shipping, an ideal solution for bundling items together or securing loads on the pallet.
BulletPoint2 : ✅ Seals for polyester strapping have a textured surface that grips the smooth surface of polyester strapping to prevent the strapping from slipping and losing tension. Secure seals using a manual strapping sealer. Polyester strapping is used to secure medium-to-large loads for storage and shipment, such as lumber and heavy pallets. These seals come with surface plated with zinc to prevent rusting to some extent.
BulletPoint3 : ✅ The strapping seal is a soft-metal connector that is used by a sealer clamp to bind two ends of a plastic strap together for enhanced joint efficiency. Once a seal is made after crimping, it is permanent and very secure. This type of metal closure is much better than the wire spring buckle type of connector.
BulletPoint4 : ✅ Open seals, the most common plastic seal, allow you to place the seal on after tensioning has occurred while closed seals must be threaded onto the strap before tensioning and they are used most frequently with round packages or bundles. An open seal is typically used with polyester strapping while a closed seal has must be put on before the tensioning operation can be performed and is typically used with steel strapping.
BulletPoint5 : ✅ Gripper seals, sometimes called serrated seals, have barbs or small thorns that grip the polyester strapping for extra strength to prevent slipping, increase tension at the joints, and ensure cargo safety. Serrated seals are made with “teeth” that actually grip the strap, yielding higher joints than traditional seals. They are secured in place using a sealer tool.
Color : ½"(13mm) W×1"(25mm) L×0.024"(0.6mm)thick
Color1 : グリーン
Color2 : オレンジ
Color3 : ホワイト
CompatibleWithVehicleType : Passenger Car
CompatibleWithVehicleType1 : Watercraft
CompatibleWithVehicleType2 : Passenger Car
CompatibleWithVehicleType3 : Trailer
CustomerPackageType : Standard Packaging
Department : unisex-adult
ExternallyAssignedProductIdentifier : 4989999400267
ExternallyAssignedProductIdentifier1 : 700306941457
ExternallyAssignedProductIdentifier2 : 0700306941457
GpsrSafetyAttestation : 1
IncludedComponents : 1 x 10x Cable Ties
ItemLength : 1 inches
ItemName : Banding Clip, Open Serrated Seal, Polyester (PET) Strapping, Snap-On Gripper Strap Clip, 1/2" (13 mm) Wide, 1" (25 mm) Long, 0.024" (0.6 mm) Thick, Regular Duty Shipping, 1 Pack, 200 Pcs/Pack, 1306
ItemPackageDimensions_Height : 18.5928 centimeters
ItemPackageDimensions_Length : 5.588 centimeters
ItemPackageDimensions_Width : 12.192 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : securing-straps
LoadCapacity : 1.6 ton
Manufacturer : Ewandor
Material : Alloy Steel
ModelName : Lifting Sling Strap
ModelNumber : 138113
NumberOfItems : 200
NumberOfPieces : 1
OemEquivalentPartNumber : A2442-42F-PK
PartNumber : 700306941457
Pattern : Solid
ProductDescription :

Industrial & Scientific › Packaging & Shipping Supplies › Packaging Labels & Tags › Shipping Seals

Open (Snap-On) Serrated Strap Clip | Gripper Strapping Seal | Regular Duty Joining Method for Polyester (PET) Strap

✅ MALLEABLE: These strapping seals are fully malleable constructed from quality steel to work on curved surfaces.

✅ EASY TO APPLY: The snap on seal is quick and easy to apply for use in regular duty packaging situations. This seal comes serrated for extra strength.

✅ SECURE GRIP: Serrated seals get a better grip on your strapping for a tighter hold with increased joint efficiency.

How to seal polyester strapping using tensioner and sealer?

Step ①: Place the Tensioner

Press the handle down and load the bottom strap under the cutter and under the gripper foot.

Release the handle. Load the upper strap through the cutter and through the windlass.

Step ②: Move the Tensioner

Ratchet the handle until desired tension is achieved.

Step ③: Place the Seal

Place the seal about 2 inches (50.8 mm) in front of the tool, making sure both straps are inside the seal.

Step ④: Place Jaws in the Middle of the Seal

Open jaws of the sealer and place evenly across the middle of the seal.

Step ⑤: Close the Seal

Close the seal by bringing the sealer’s handles all the way together.

Step ⑥: Remove the Sealer

Easily remove the sealer from the seal.

Step ⑦: Release the Strap

Once a secure joint is created, press on the tensioner tension handle to cut and release the strap.

Take the tool off the strap.

Step ⑧: Final Result

Staggered jaws on the sealer create a patented lock pattern on the seal that increases joint efficiency making your loads more secure.

ProductSiteLaunchDate : 2020-05-13T05:28:42.954Z
Size : Pack of 200 Pcs
StreetDate : 2017-05-31T00:00:01Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 24101600