Cart 2 india

Specification
Brand : Best Metal Products
BulletPoint : ¼” STEEL TRIANGLE D-RING WITH BOLT ON BRACKET BLACK POWDER COATED 3,000 lbs WLL
BulletPoint1 : Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
BulletPoint2 : Polyester Webbing Is Abrasion, Stretch And Wrought Resistant . Strap Has An Angle Cut End For Easy Insertion Thru Buckle
BulletPoint3 : Cinch Cam Buckle Is Made From Zinc-Diecast Metal And Has A Zinc-silver Finish. Zinc-Diecast Buckles Are Rust Proof
BulletPoint4 : 700 lb. Working Load Limit.
BulletPoint5 : Assembled In The USA.
Color : Black
CompatibleWithVehicleType : Bicycle, ATV, UTV, Motorcycle, boat, kayak, canoe, ladder rack, truck rack, van rack,
ExternallyAssignedProductIdentifier : 4260557842447
ExternallyAssignedProductIdentifier1 : 0818825020031
ExternallyAssignedProductIdentifier2 : 818825020031
ItemDisplayDimensions_Length : 2 feet
ItemDisplayDimensions_Width : 2 feet
ItemName : (10) ¼” Steel Triangle D-Ring with bolt on Bracket Cargo Tie-Down Anchors, Black Steel V-Ring Bolt on Trailer Anchor, Mount Pan Fitting Tie Down for Trailers, Trucks Boot and Warehouses 10001160-10
ItemPackageDimensions_Height : 40.1066 centimeters
ItemPackageDimensions_Length : 23.6982 centimeters
ItemPackageDimensions_Width : 29.3878 centimeters
ItemPackageQuantity : 10
ItemShape : V
ItemTypeKeyword : securing-straps
LoadCapacity : 700 Lbs
Manufacturer : BMP
Material : Steel
ModelName : JSD25
ModelNumber : 1000116-10
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 1000116-10
ProductDescription :
¼" STEEL TRIANGLE D-RING WITHBOLT ON BRACKET

Set Of 10

This product is black powder coated. The WLL is 3,000 lbs.

Measurements:

• Width of the inside of the D-Ring at the widest point= 1 4/5"
• Height of the inside of the D-Ring at the longest point= 1 ½"
• Width of the bolt on hinge peice= 1 3/5"
• Hole for the bolts Diameter= 2/5" (For Standard 3/8" Bolts)

(Per federal D.O.T. requirements, "working load" has to be 1/3 of breaking strength.)

ProductSiteLaunchDate : 2017-07-21T07:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31161500