Cart 2 india

Specification
Brand : Generic
BulletPoint1 : This kit includes 1 Grooving Tool Box and Rai Fix Hooks of your choice. (angle grinder NOT included).
BulletPoint10 : RAI-CUT MkII cuts dry with diamond disc Ø 5" (125 mm).
BulletPoint2 : Adjustable cutting box to apply a groove on the back of the tile - Device to cut the slot in the back of the tile/slab.
BulletPoint3 : Intended for use with the Rai-Fix Mechanical Fixing System for wall installation of tiles and stone slabs.
BulletPoint4 : The Rai-Cut MkII cuts the required groove to the correct depth and angle in the back of the tile or stone and is adjustable to accommodate the 1/4" and 3/8" plates.
BulletPoint5 : RAI-CUT MkII works on tiles/slabs with minimum thickness of 5 mm (3/16”) and maximum thickness of 1 3/16" (30mm).
BulletPoint6 : RAI-CUT MkII is made of stainless steel and it is provided with clutch hole for connecting a vacuum dust extractor.
BulletPoint7 : Suitable with almost all angle grinders with power between 600-1100W.
BulletPoint8 : Available for grinders with M14 arbor attachment (art. 299PFMK2EU) and for angle grinders with 5/8" – 11 arbor attachment (art. 299PFMK2US).
BulletPoint9 : The RAI-CUT MkII device is part of the RAI-FIX system. RAI-CUT MkII is fundamental to create the slot in the back of the tile/slab. Slot where to insert the RAI-FIX hook.
Color : Stainless Steel
ExternallyAssignedProductIdentifier1 : 0667673437047
ExternallyAssignedProductIdentifier2 : 667673437047
FinishType : Stainless Steel
IncludedComponents : Grooving Tool Box Stainless Steel + Hooks
ItemName : RAI-Cut MkII Grooving Tool Box Stainless Steel with Rai-Fix Safety Withholding Hooks for Large Tiles Slabs (200, 8 mm)
ItemPackageDimensions_Height : 9 inches
ItemPackageDimensions_Length : 14 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemShape : S
ItemTypeKeyword : screw-in-hooks
Manufacturer : Raimondi SpA
Material : Stainless Steel
MaximumWeightRecommendation : 198 pounds
ModelName : RAI-FIX-LTGTB-RAI-FIX-LTAT
ModelNumber : RAI-FIX-LTGTB-RAI-FIX-LTAT
MountingType : Wall Mount
NumberOfHooks : 50/100/200/500
NumberOfItems : 200
PackageLevel : unit
PartNumber : RAI-FIX-LTGTB-RAI-FIX-LTAT
ProductDescription : Raimondi RAI-CUT MkII grooving tool Box Unit for Mechanical System

RAI-CUT MkII – Device to cut the slot in the bak of the tile/slab

Include; Stainless steel box with vaccum connection (angle grinders not included)

Adjustable cutting box to apply a groove on the back of the tile - Device to cut the slot in the back of the tile/slab

The Raimond Rai-Cut MkII Grooving Tool is intended for use with the Rai-Fix Mechanical Fixing System for wall installation of tiles and stone slabs. The grooving tool has a universal attachment and is supplied with an angle grinder. The Rai-Cut MkII cuts the required groove to the correct depth and angle in the back of the tile or stone and is adjustable to accommodate the 1/4" and 3/8" plates.

RAI-CUT MkII works on tiles/slabs with minimum thickness of 5 mm (3/16”) and maximum thickness of 1 3/16" (30mm)
RAI-CUT MkII is made of stainless steel and it is provided with clutch hole for connecting a vacuum dust extractor.
Suitable with almost all angle grinders with power between 600-1100W.
Available for grinders with M14 arbor attachment (art. 299PFMK2EU) and for angle grinders with 5/8" – 11 arbor attachment (art. 299PFMK2US).
The RAI-CUT MkII device is part of the RAI-FIX system. RAI-CUT MkII is fundamental to create the slot in the back of the tile/slab. Slot where to insert the RAI-FIX hook.
RAI-CUT MkII cuts dry with diamond disc Ø 5" (125 mm).


Raimondi Rai-Fix safety withholding Hooks 8mm

Mechanical support system for minimum 3/8" thick tile/slab - 5/16" Wing Size

The RAI-FIX Anchoring system provides a simple and effective solution to prevent the fall of the tiles applied vertically with adhesive in case of detachment from the wall.

The safety withholding hook, of RAI-FIX is made of stainless steel and can be used with tile slabs with a minimum thickness of 1/4" (6mm)

It is the perfect solution because it is completely invisible once the facade is installes.

When installing tiles/slabs bigger that 12” (being them in ceramic, porcelain or natural stone) in façade with adhesive, it is required to use a mechanical safety system which prevents the tile / slab to fall down in the event of detachment of the adhesive.*

Indeed adhesives guarantee perfect anchorage of the tile/slab only if perfectly applied. But this is not always the case.

In addition to that, it is hard to predict the strains the tile/slab will have to bear because of building’s settlement as well as expansion for temperature range, extreme weather conditions, earthquake and so on…

Therefore, the safety withholding hook RAI-FIX is a crucial ally of the architect/designer (and of course of the buyer) to assure the maximum safety. In addition to that RAI-FIX expands the design possibilities since tiles and slabs of any size can be now used.

Aesthetically speaking, RAI-FIX is the perfect solution since it is completely invisible once the façade is done. In fact RAI-FIX has to be placed between the tile / slab and the wall and therefore it is 100% hidden.

The safety withholding hook RAI-FIX is made of stainless steel and can be used with tiles / slabs of minimum thickness 6 mm (0.24 inches).

The installation is very simple and is carried out directly on the jobsite in a few seconds.

* Regulations may vary from Country to Country. Therefore it is necessary to refer to the legislation in force in the area where the building /jobsite rises

Tensile strength laboratory tests gave the following result: 198 lbs.
With 10 holes Ø 5/16" and one hole Ø 9 1/3" for inserting the anchor screw.
Made in premium quality stainless steel.
With the RAI-FIX installation of large tiles and slabs on a vertical surface is very simple and carried out directly on the job site.
The safety withholding hook is a simple and effective device that prevents the tile of slab from falling down in the event of detachment.
The safety withholding hook, of RAI-FIX is made of stainless steel and can be used with tile slabs with a minimum thickness of 3/8" (8mm)
ProductDescription1 : 1. Non-Slip, Rust-Resistant, & Finger-Friendly Protection: Our heavy-duty S hooks are crafted from premium-grade steel, coated with a smooth, rust-resistant vinyl layer. Our rubber coating have smooth surface so that it can not scratches to your fingers, clothing, or delicate items like scarves or purses. More importantly, the non-slip design keeps these hooks securely in place, so you don’t need to worry about them sliding off the rod or dropping your items.
ProductDescription2 : 2. Mulit-Size Options: We have a variety of sizes available (3″, 4″, 6″)，our S hooks feature a dual-opening design—1.1 inches on the small side, perfect for standard closet rods, and three choosen size on the large side for bulkier items. S hooks for hanging heavy duty can support substantial weight without bending, making them the perfect solution for heavy kitchen pots, tools, or bulky clothing. Whether you’re organizing a cluttered kitchen or tidying up your garage, our hooks for hanging bring industrial strength to everyday tasks.
ProductDescription3 : 3. Engineered for Long-Lasting Performance: Built with high-grade materials, our S hook are designed to withstand years of use. The anti-rust coating ensures they remain smooth and shiny even in humid environments like kitchens or bathrooms.
ProductDescription4 : 4. Versatile Use Across Any Space: No more messy countertops, overflowing closets, or cluttered garages! Our s hooks for hanging are ideal for hanging everything from kitchen cookware like pots, pans, and spatulas to mugs and utensils. In the closet, they are perfect for organizing clothes, jeans, scarves, and accessories. In the garage, use them to organize tools, and in the bathroom, hang towels and robes. These hooks even work outdoors for plants and garden tools, helping you create order and efficiency in every room.
ProductDescription5 : 5. Hassle-Free, Tool-Free Installation: Say goodbye to complicated setups—no tools, nails, screws, or adhesives required! Simply hang these hooks on rods, bars, or shelves, and instantly create organized storage. Their sleek black vinyl coating blends seamlessly with any décor, while the S-shaped design provides a practical, space-saving solution. Whether in your kitchen, bathroom, garden, or garage, our hooks make it easy to get organized and stay clutter-free.
ProductSiteLaunchDate : 2024-09-03T00:32:00.728Z
RecommendedUsesForProduct : The safety withholding hook is a simple and effective device that prevents the tile of slab from falling down in the event of detachment.
Size : 8 mm
Style : RAI-FIX-LTGTB-RAI-FIX-LTAT
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Tile
UnitCount : 1
UnspscCode : 31162100