Cart 2 india

Specification
AgeRangeDescription : Adult
ArtCraftKitType : Decal Application
Brand : Generic
BulletPoint1 : Silver Stripe only, Suitable for BLACK/DARK base color
BulletPoint2 : Good extensibility after activated
BulletPoint3 : Kindly search "ST COLOR hydro dipping film" for more of our products
BulletPoint4 : Applicable with all brands of activators
BulletPoint5 : Vaccum sealed packing to keep the film in good condition
BulletPoint6 : Vaccum sealed packing to keep the film in good condition
Color : Black
ExternallyAssignedProductIdentifier : 4963173176735
ExternallyAssignedProductIdentifier1 : 0702868278040
ExternallyAssignedProductIdentifier2 : 702868278040
GpsrSafetyAttestation : 1
IncludedComponents : Hydrographics film (Carbon Fiber, Silver Stripe, 50cm Widthx400cm Length), Activator (all brands), Oil base paint, Clear paint for glossing, Vacuum sealed packing, Instruction booklet
ItemName : ST Color Carbon005-Water Transfer Printing / Hydrographics / Hydro Dipping Film-Carbon Fiber2(Silver Stripe Only)-50cm Widthx400cm Length
ItemPackageDimensions_Height : 51.4096 centimeters
ItemPackageDimensions_Length : 2.3876 centimeters
ItemPackageDimensions_Width : 3.2004 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : screen-printing-kits
Manufacturer : UniJade
Material : PVA
ModelName : Carbon Fiber
ModelNumber : Carbon005
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PaintType : Oil
PartNumber : Carbon005
ProductDescription : Water Transfer Printing/Hydro Dipping/Hrdrographics is the technique to transfer the pattern of the film to any object surface. Please follow the steps 1. Prep, Prime, and Paint your object. Besides of ABS plastic, all other materials need to be painted with oil base paint in order to proceed water transfer printing. 2. Cut the film in proper size for your object It's important to consider the height of your object. Make sure the film is much bigger than the cover area of your object. 3. Tape 4 sides of the film In case of the pattern distortion and scattering after spraying activator. 4. Distinguish the hydrophilic side of the film We and use your thumb and index fingers to pinch the film for few seconds. After released, the sticking side is the hydrophilic side of the film. 5. Lay the film on water for more than 1min WITH the hydrophilic side face down Tap/drive the bubble out under the film if there is any. The lower water temperature is, the more time required for the film stay on water. 6. Spray activator in fine mist form evenly on the film to activate the film 7. Dip your object in 40degree angle into water slowly and steadly 8. After fully immersed, slightly shake your object in the water for few seconds 9. Take out your object and rinse the object surface with running water of faucet or showerhead It's important not to touch or rub the object surface before it's dry during/after rinsing. 10. Let the object dry naturally or by oven 11. Paint the clear paint for glossing and/or protection purpose for your object surface
ProductSiteLaunchDate : 2021-05-19T20:00:33.503Z
ScaleName : life-size
Seasons : All Seasons
Size : 50cm Widthx400cm Length
Style : Carbon Fiber
SubjectCharacter : Carbon Fiber
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : People
TargetGender : unisex
Theme : Carbon Fiber
UnspscCode : 44102000
WarrantyDescription : no