Cart 2 india

Specification
Brand : SazkJere
BulletPoint1 : ★Instructions: One end of the sensor is fixed by a screw hole, and the other end is left in the air. Apply force in the direction indicated by the label. Please be careful not to directly press the white latex part to avoid damage to the sensor. Package Included: 2pcs load cell +2pcs hx711 ad module + 8pcs M4*10 Screws.
BulletPoint2 : ★You need to connect load cell with HX711 module like this: Red to E+, Black to E-, Green to A+, White to A-.
BulletPoint3 : ★Load Cell: 4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Works for arduino and raspberry pi
BulletPoint4 : ★This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier. The HX711 On-chip active low noise PGA with selectable gain of 64 and 128
BulletPoint5 : ★How to change the rate of HX711? When you have the XI pin grounded, then the RATE pin controls this. RATE=1 for 80SPS, or RATE=0 for 10SPS.
ExteriorFinish : Iron
ItemName : SazkJere 2 Sets Digital Load Cell Weight Sensor with Screws + HX711 AD Module Weighing Sensor for DIY Portable Electronic Kitchen Scale Kit Compatible Arduino (20kg (44lb))
ItemPackageDimensions_Height : 12 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemTypeKeyword : industrial-scale-and-balance-parts
Manufacturer : SazkJere
Material : aluminium
MetalType : Iron
NumberOfItems : 2
PartNumber : SJ61X2
ProductDescription : Load Cell:
1. 4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Works for arduino and raspberry pi.
2. One end of the sensor is fixed by the screw hole, the other end is kept in a floating state, and the gravity is applied in the direction indicated by the label.
3. Special attention must be paid not to directly press the white rubber part to avoid damage to the sensor.

Connection:
Red to E+
Black to E-
Green to A+
White to A-


HX711 AD Weight Module
1. The module uses 24 high-precision A/D converter chip hx711, is designed for high-precision electronic scale and design, with two analog input channels, the internal programmable gain amplifier integrated multiplier 128.
2. The input circuit can be configured to provide a bridge voltage electrical bridge (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module.
3. Operation supply voltage range: 2.6 - 5.5V, Operating Temperature Range:-20 degree to +85 degree.
4. Simple digital control and serial interface: pin-driven controlsno programming needed.
5. Selectable 10SPS or 80SPS output data rate, Simultaneous 50 and 60Hz supply rejection.
6. Current consumption including on-chip analog power supply regulator: normal operation<1.5mApower down<1uA.

HX711 Features:
Two selectable differential input channels
On-chip active low noise PGA with selectable gain of 64 and 128
On-chip power supply regulator for load-cell and ADC analog power supply
On-chip oscillator requiring no external component with optional external crystal
On-chip power-on-reset

ProductSiteLaunchDate : 2024-05-24T14:54:08.816Z
Size : 20kg (44lb)
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31161700