Specification Brand : NJBVRS BulletPoint1 : - Direct output as voltage signal. BulletPoint2 : - Made of quality materials, . BulletPoint3 : - Full bridge structure, four leads, easy to use. BulletPoint4 : - Take special care not to press the white glued part directly to avoid damaging the sensor. BulletPoint5 : - end of the sensor is fixed by the screw hole, the other end is kept in a suspended state, and is applied in the direction indicated on the label. Color : 0-150KG ExternallyAssignedProductIdentifier : 7504358044240 FitType : Universal ItemName : Load Cell Alloy Steel Weighing Scale Accurate Stability For Hopper Automatic Tester Robot Bellows Share Beam Load Cell 200kg(0-150KG) ItemPackageDimensions_Height : 8 centimeters ItemPackageDimensions_Length : 25 centimeters ItemPackageDimensions_Width : 15 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : industrial-scale-and-balance-parts Manufacturer : NJBVRS ModelName : 248611386 ModelNumber : 248611386 NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : 248611386 ProductDescription : A load cell is actually a device that converts a mass signal into a measurable electrical signal output. When using a sensor, you should first consider the actual working environment in which the sensor is located. This is crucial to the correct selection of the weighing sensor. It is related to whether the sensor can work normally, its safety and service life, and even the reliability and safety of the entire weighing instrument.
Capacity: 50-100000kg Sensitive: 2±0.002mVN Rated output: 2.0±0.004mv/v Input resistance: 350±5 Accuracy Class: C3 Output resistance: 350±3 Non-linearity: 0.016%F.S Safe overload: 120%F.S Hysteresis: 0.016%F.S Zero Balance: ±1%F.S Creep in 30 minutes: 0.016%F.S Excitation voltage: 9-12V Temperature effect on out put: 0.019%F.S/10 Temp. effect on zero: 0.011% F.S. / 10 Insulation resistance: 5000 Environmental protection: IP67 Operating temperature:-20~+55