Cart 2 india

Specification
Brand : DISIROU
BulletPoint1 : 1.In the measurement state, the gross weight, net weight, peak value, bottom value, peak-to-bottom value can be switched to display,
BulletPoint2 : 2. in the setting state, the parameter symbol and value can be displayed
BulletPoint3 : 3.Unit indicator g, Kg, t, N are indicator lights for the weight unit. When the weight unit is customized, all weight indicators are off
BulletPoint4 : 4. Status Indicator ZERO, When lit, the weight is zero. MOT. When it is on, the weight is changing
BulletPoint5 : 5. OUT1 Status indication of input and output ports. OUT2 The current display value status indicator, in the measurement state, press the key to switch the display.
Color : 1
ExternallyAssignedProductIdentifier : 7505616522838
ItemName : High-Precision Load Cell Scale Sensor, Weighing Display Controller Peak Weighing Instrument Weighing Sensor Display Relay for Weight High Pressure Tension Weighing(AD2015E2)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-scale-and-balance-parts
Manufacturer : DISIROU
MeasurementAccuracy : 1
ModelNumber : 317675365
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 317675365
ProductDescription : Product model: AD2015E/E2/E4
display accuracy: 1/10000
Display window: single row 5-digit LED display
A/D conversion: high-performance 24-digit AD
Power supply : DC12V~30V
output rate: 10/40/640/1280 times/sec
Port output: 2015E: dual relay
2015E2: dual relay + RS232, 2015E4: dual relay + RS485
Serial number
Name

Display total value: Net, Peak, Valy three lights are all off
Display net value: Net light is on
Display peak value: Peak light is on
Display bottom value: Valley light is on
Display peak-valley value: lights are on

4 SWITCH
In the measurement state: switch the measured value (gross weight, net weight, peak value, valley value, peak-valley value)
5 ZERO
In the measurement state: clear
6 OFTEN
In the measurement state: enter the common parameter menu
7 SET/CALI
In the measurement state: short press to enter the setting menu
The composition of the terminal:(port 1, 2, 3, 4, the 4 interface functions are determined by the user's optional model)
Relay output
This instrument can choose to use relay or transistor output. When using relay output, since the relay output can be connected to both DC load and AC load, there is no internal protection
Protection of DC Relay
The resistor/capacitor network is applied to the low (DC30V) DC relay circuit, and it is connected across the load to form a DC relay protection circuit driven by the relay to drive the DC load, as shown in the following figure:
Protection of AC Relay
When using an AC relay to control the load, it is recommended to connect a resistor-capacitor network and a variable resistor to the AC relay for protection, as shown in the figure below:
Sensor connection:
This meter needs to be equipped with a resistance strain brid sensor. The wiring method is: four-wire connection. The specific wiring method is shown in the "sensor" part of the terminal diagram in the previo
ProductSiteLaunchDate : 2024-08-14T07:13:36.426Z
Size : AD2015E2
UnitCount : 1