Cart 2 india

Specification
Brand : SUIDEK
BulletPoint1 : Wide Compatibility: IDE and SATA adapter can support 2.5"or 3.5" SATA SSDs/HDDs and 3.5" IDE HDDs. SATA to USB adapter allows for simultaneous connection of 2 hard drives for data transfer: IDE(A) +SATA(C), or SATA(B) +SATA(C).(Please note that IDE(A) and SATA(B) cannot be connected simultaneously）
BulletPoint2 : Offline Cloning: Hard drive cloner enables offline cloning without the need for a computer. Simply press the clone button for 3 seconds until the first blue light (25%) flashes. Offline cloning is supported only with these combinations: Source IDE(A)/SATA(B) → Target SATA(C). Capacity requirement: Target ≥ Source. （Note: Make sure the target disk has a larger capacity than the original disk. And offline cloning requires connecting to a DC power supply and upstream USB cable must be disconnected.）
BulletPoint3 : 5Gbps USB SATA SSD Enclosure: IDE to SATA adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It is also backward compatible with USB 2.0 and USB 1.1. Hard drive to usb supports UASP, which is 70% faster than traditional USB 3.0
BulletPoint4 : Plug and Play: Hard drive USB adapter no drivers or software needed; just plug and play with hot-swapping supported. The LED light indicates power and activity status and enters sleep mode after 30 minutes of inactivity
BulletPoint5 : Package Content: The external hard drive reader package includes a USB-C to SATA/IDE adapter, a USB Type-C to Type-C cable, a 4-pin IDE power cable, a 12V2A power cable, and an user manual. The IDE to USB hard drive converter is easy to connect, with Type-C uplink port, no need to distinguish between the front and back, The hard drive adapter is compact and portable, making it a great companion for travel work
BulletPoint6 : Note: For hard disks labeled the same capacity, please carefully check their actual memory capacity in computer's Disk Management, make ensure that the target disk capacity is greater than or equal to the source hard disk before cloning. （IDE hard drives are not recommended for cloning due to their older technology and potential bad sectors.）
Color : Deep Black
CompatibleDevices : Chassis Power Extension Adapter Cable
CompatibleDevices1 : Laptop
CompatibleDevices2 : Desktop
ConnectivityTechnology1 : SATA
ConnectivityTechnology2 : IDE
ConnectorGender : Male-to-Female
ConnectorType : Interface Type Sata
ConnectorType1 : USB Type A
ConnectorType2 : USB Type C
CustomerPackageType : sealed anti-static bag or similar
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
InputVoltage : 12 volts_of_direct_current
ItemName : USB 3.0 to IDE and SATA Adapter, Type-C 5Gbps External Hard Drive Reader Converter for 2.5/3.5 SATA HDDs SSDs and 3.5 IDE HDDs with Offline Clone Function, Included 12V2A Power Adapter
ItemPackageDimensions_Height : 12.7 centimeters
ItemPackageDimensions_Length : 8.7 centimeters
ItemPackageDimensions_Width : 9.9 centimeters
ItemPackageQuantity : 4
ItemShape : Round
ItemTypeKeyword : computer-sata-cables
Manufacturer : Ocean Computer Technology (Shenzhen) Co., Ltd
Material1 : Copper
Material2 : Copper
ModelName : 54250-SOTDP-4
ModelNumber : d73aa943-34dd-4f55-95b4-87be53bfbbf3
NumberOfItems : 1
NumberOfPins : 15
NumberOfPorts : 2
PartNumber : S1235C
PowerPlugType : type_a_2pin_na
ProductDescription : 1. The USB to SATA adapter does not support TRIM commands but does support UASP acceleration 2.The SATA adapter supports SATA/ATAPI LBA48 addressing mode. 3.The SSD USB adapter does not support optical drives 4.The SATA to USB-C adapter supports both SATA3 and IDE133 interface protocols for downstream connections, with dual drive letters displayed. External hard drive enclosure also supports simultaneous reading of both drives, making it easy to connect a variety of new and old storage devices 5. The USB-C to 12V adapter SATA(C) port uses a separate channel, while the SATA(B) and 3.5” IDE(A) ports share the same transmission channel and only one can be used at a time, with a switch provided to toggle between them 6.The SSD to USB adapter supports hard drive cloning functionality, allowing cloning from either drive A or drive B to drive C (drives B and A share the same transmission channel and cannot be used simultaneously). Note: IDE hard drives are not recommended for cloning due to their age and potential for bad sectors 7. SATA/SATA/IDE drive bay indicator light: Yellow. Lights up when a hard drive is inserted and blinks during read/write operations. Turns off during sleep mode after 30 minutes of inactivity 8. USB to USB-C adapter clone progress indicator lights: Blue, with 4 LEDs lighting up sequentially at 25%, 50%, 75%, and 100% to indicate cloning progress
ProductSiteLaunchDate : 2024-07-11T07:00:00.000Z
RecommendedUsesForProduct : Extending power supply to hard disk drives in a computer system
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 43200000
WarrantyDescription : 2 Years Warranty