Cart 2 india

Specification
Brand : Rubber Fab
BulletPoint1 : Pipe Fitting Material: SUS 304 Stainless Steel;
BulletPoint2 : Product Name: Quick Install 4-way;
BulletPoint3 : Surface treatment process: Finishing Polish;
BulletPoint4 : Pipe OD: 19mm-102mm; Feerule: 50.5-119mm;
BulletPoint5 : If you have any questions, please do not hesitate to contact us. Thank you for coming, wish you a happy life！
Color : White
ConnectorType : Cross
ConnectorType1 : Tri Clamp
ConnectorType2 : NPT
Department : Unisex Adult
ExteriorFinish : Chrome
ExternallyAssignedProductIdentifier : 9460183872435
ExternallyAssignedProductIdentifier1 : 658370707229
ExternallyAssignedProductIdentifier2 : 0658370707229
IncludedComponents : 1 x 1" Male NPT to 3/4" Female NPT Reducer Hex Bushing.
ItemName : PTFE Sanitary Tri-Clamp® Gasket, White - 6"
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sanitary-tube-fittings
Manufacturer : Rubber Fab Technologies Group
Material : Polymer
ModelName : AthuAh
ModelNumber : 40MOG-600
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 40MOG-600
ProductDescription : PTFE Tri-Clamp Gaskets are the material of choice where low temperature flexibility and hygienic seal memory are not required. We don't recommend using PTFE Gaskets where large temperature variations frequently occur because the affect on the PTFE's density makes joints more prone to leakage. With that said we recommend using high pressure clamps to help negate the affects of any temperature fluctuations. PTFE gaskets provide excellent heat resilience, second only to Tuf-Steel, with an operating range from -100 deg F to 500 deg F. From a chemical standpoint PTFE has good stability, almost no extractables, a low absorption rate, and excellent resilience against process fluids. These Tri-Clamp Gaskets can remain in service for long periods of time in both water and steam applications. If a slight misalignment of the joint is observed it is recommended to instead use a PTFE/FKM Envelope Gasket consisting of a PTFE Hygienic Seal and FKM Fluoroelastor inner core.

Storing PTFE Gaskets:

- Shelf Life: 20 Years from cure date
- Store in original packaging in clean and dry warehouse
- Do not expose to direct sunlight
- Keep more than 6' away from electric motors
- Maintain temperature between 65 deg F and 85 deg F

PTFE Gasket Standards Compliance:
- CFR 21, 177.1550
- U.S. Pharmacopeia Class VI Certification
- USDA Hazard Analysis and Critical Control Points
- Cytotoxicity Criteria
- USDA and 3A Standards
- ASME-BPE Standards for Type I and Type II
- ADI Free (Animal Derived Ingredient Free)
- Current Good Manufacturing Practices (CGMP)

PTFE Tri-Clamp Gasket Features:
- Color Code: No Dot
- -100 deg F to 500 deg F Temperature Range
- Excellent heat resilience
- Almost no extractables
- Low absorption rate
- Excellent resilience against process fluids
- Good stability
ProductDescription1 : This hemispherical lid features a unique set of features in that it reduces from a NPT fitting to a Tri Clamp fitting. It’s made of 304 stainless steel, and will reduce from 6” Tri Clamp connections to 3/8" to 1/2" MNPT connections.
ProductDescription2 : This is your solution to different fitting needs, and carries the possibility of a pressure build up.
ProductSiteLaunchDate : 2024-07-26T09:57:35.571Z
Size : 19mm x ferrule 50.5
Style : 1" Male NPT to 3/4" Female NPT
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31400000