Cart 2 india

Specification
Brand : Glacier Tanks
BulletPoint1 : Connection Type(s): Tri Clamp / MNPT
BulletPoint2 : Connection Size(s): 2 in. / 1 in.
BulletPoint3 : Stainless Steel: SS304
BulletPoint4 : 3-A Certificate authorization number 3572
BulletPoint5 : Material fully complies with 3-A standard, low carbon content, Material Test Certificate available with Heat number upon request
Color : Stainless Steel
ConnectorType : Adapter
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 0016102411170
ExternallyAssignedProductIdentifier2 : 016102411170
ItemName : NPT Adapter | Tri Clamp 2 inch x MNPT 1 in - Glacier Tanks - (2 Pack)
ItemPackageDimensions_Height : 2.25 inches
ItemPackageDimensions_Length : 2.5 inches
ItemPackageDimensions_Width : 2.25 inches
ItemPackageQuantity : 1
ItemTypeKeyword : sanitary-tube-fittings
Manufacturer : Glacier Tanks
Material : Stainless Steel,Steel
ModelName : CRS106S-800600
ModelNumber : 2CMP-200-316-7
NumberOfPieces1 : 1
NumberOfPieces2 : 2
PartNumber : 21MP-G200-100
ProductDescription :

Notice About Bundle Packs:
Please understand our bundle packs share from a communal inventory. A buyout of one pack type will consume inventory of other packs. Due to limitations, our system has a delay in updating other pack stock quantities. Thank you graciously for understanding.

National Pipe Taper (NPT) are a standardized fitting that is commonly used for joining pipe. Due to the tapered threads (wider diameter at the base of the threads, similar to a trapezoid) the male fitting will tighten the further it is threaded into the female. NPT follows the technical standards provided by the American National Standard Pipe Thread standards, often called national pipe thread, which is often where the confusions with NPT arises, as NPT is specifically an acronym that referes to tapered pipe.

National Pipe Straight (NPS) are straight thread that is sized to be compatible with common water heater elements and should be compatible with most NPS straight threads.

Determining NPT/NPS Size:
Sizing NPT/NPS is based on the nominal pipe diameter, and not the ouside diameter (OD) of the threads. For example: A 1/2" NPT male has an outside thread diameter of approximately 3/4", but as stated the correct NPT size is 1/2", including the counterpart female.

Notice: While NPT and NPS threads may be joined together, their threads may not form a proper seal, be loose fitting, or otherwise not an optimal connection.

ProductSiteLaunchDate : 2017-09-19T23:14:27.097Z
Size : (2 Pack - Save 10%)
UnitCount : 2
UnspscCode : 40141700