Cart 2 india

Specification
Brand : RYOBI
BulletPoint : Compatible with All 1/4 Sheet Sanders Vented Hole Pattern for Maximum Dust Collection Includes: (3) 80 Grit, (3) 120 Grit, and (3) 220 Grit Pre-cut holes for uniform elimination of dust and wood chips Applications: Wood, Metal, Drywall, Fiberglass, and Painted Surfaces
BulletPoint1 : Made from heavy duty cloth backing our abrasive rolls are the perfect economical replacement sandpaper rolls for your Performax and Jet 16-32 and other machinery that accepts 3” wide rolls. These high performance aluminum oxide rolls are designed for all purpose sanding. The grain is resin bonded and have non-loading properties for extra long sanding life. MADE IN THE USA!
BulletPoint2 : The rougher or lower grits like 60 grit can be used for abrasive planing and dimensioning. The medium grits like 80, 100 and 120 are typically can be used for lighter dimensioning projects and general surface prep. When using 150 grits and 220 grits we recommend using those higher grits for finishing passes only.
BulletPoint3 : The right amount of pressure you exert on your boards is absolutely critical. Too much and it will shorten the life of your abrasive roll, burn the material or cause problems with the motor on your machinery. To avoid too much pressure, with your machine turned off, place the material under the sanding drum, the raise or lower the drum so the drum contacts the material but can still be rotated by hand. Take the stock out with no more drum adjustment and proceed to sanding normally.
BulletPoint4 : Straight feed? How about angling your stock feed through the drum instead. Angling the stock offers many advantages like less loading due to glue lines, better and more even wear and reduced motor loads. Just a slight angle provides you with more effective stock removal. Keep in mind that to achieve the best finish, the last two passes on the material should always be with the grain.
BulletPoint5 : When sanding misshapen stock pieces you should always start sanding the piece with the crown side up. This helps prevent tipping or rocking when the piece is being fed through the sander. Once the down is gone, flip the stock over and sand the other side. As always, take extreme care and caution when sanding boards that are bowed, twisted or otherwise imperfect.
Color : Purple
CompatibleDevices : Drum Sander
CompatibleMaterial : Wood
CompatibleMaterial1 : Wood
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Drywall
CompatibleMaterial4 : Fiberglass
CompatibleMaterial5 : Painted Surfaces
ExternallyAssignedProductIdentifier1 : 033287197194
ExternallyAssignedProductIdentifier2 : 0033287197194
ExternallyAssignedProductIdentifier3 : 00756343815053
IncludedComponents : 9 x 1/4 Sheet Sander Sheets
ItemDisplayDimensions_Height : 0.75 inches
ItemDisplayDimensions_Length : 4.75 inches
ItemDisplayDimensions_Width : 3.25 inches
ItemName : RYOBI 9 PC. 1/4 Sheet Sander Sand Paper Set (A19901)
ItemPackageDimensions_Height : 19.7 centimeters
ItemPackageDimensions_Length : 1.5 centimeters
ItemPackageDimensions_Width : 16.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sandpaper-sheets
Manufacturer : Ryobi
Material : Sand Paper
ModelName : 1/4 Sheet Sander Sand Paper
ModelNumber : #A19901
NumberOfItems : 1
PackageLevel : unit
PartNumber : A19901
ProductDescription : RYOBI 1/4 Sheet Sand Paper is compatible with all 1/4 Sheet Sanders. This set comes with multiple grit options (80 grit/120 grit/220 grit) to help tackle most jobs. The pre-cut pads allow for quick and convenient changing on and off of the tool. This set is a great replacement for when it’s time to upgrade your previous sanding pad. Ideal for Wood, Metal, Drywall, Fiberglass and painted surfaces. This 1/4 Sheet Sand Paper Set is a consumable item and includes nine pieces of replacement sandpaper.
ProductSiteLaunchDate : 2023-10-02T12:22:35.529Z
Size : 4.5 x 5.5 inch
Style : 100 Grit
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 9