Cart 2 india

Specification
Brand : Walfront
BulletPoint1 : 【Applicable Objects】This air buffer polisher is dedicated to all kinds of light and small metal dead corners, spray polishing, burrs, rust removal and detail trimming
BulletPoint2 : 【Advantage】The eccentric pneumatic grinder has 3MM yaw, strong force, which can throw rough grinding work. It is very easy and convenient for you to use it
BulletPoint3 : 【Specification】No-Load Speed: 15000 (rpm), Air Inlet Size: Approx. 0.6cm / 0.25in, Compressed Air Flow: 8CFM, Exhaust Direction: Rear exhaust, Air Connection Screw: 1/4-19NPT, Noise Value: Less than 83DB
BulletPoint4 : 【Package】There are 3 sizes x 6 kinds of automatic polishing pads to meet your different working needs. It is a complete tools, you can operate it yourself, suitable for DIY enthusiasts
BulletPoint5 : 【Function】This pneumatic polisher can change the air flow to control the speed of grinding, polishing and waxing
ItemName : 60Pcs Red Eccentric Air Sander Pneumatic Air Sander Pneumatic Car Waxing Polishing Sanding Machine for Spray Polishing, Burrs, Rust Removal (European valve)
ItemPackageDimensions_Height : 13 centimeters
ItemPackageDimensions_Length : 23 centimeters
ItemPackageDimensions_Width : 16 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sanding-blocks
ItemTypeName : Sanding Blocks
Manufacturer : WALFRONT
ModelName : WALFRONT2dh5zuxmbq-12
ModelNumber : WALFRONT2dh5zuxmbq-12
NumberOfItems : 1
PartNumber : WALFRONT2dh5zuxmbq-12
PowerSourceType : Air Powered
ProductDescription : 1. Dedicated to all kinds of light and small metal dead corners, spray polishing, burrs, rust removal and detail trimming.
2. Eccentric pneumatic grinder with 3MM yaw, strong force, can throw rough grinding work.
3. Can change the air flow to control the speed of grinding, polishing and waxing.
4. There are 3 sizes x 6 kinds of automatic polishing pads to meet your different needs.
5. Complete tools, you can operate it yourself, suitable for DIY enthusiasts.

Spec:
Item Type: Air Sander
Material: Stainless steel
Model: AT-1500R60
No-Load Speed: 15000 (rpm)
Air Inlet Size: Approx. 0.6cm / 0.25in
Compressed Air Flow: 8CFM
Exhaust Direction: Rear exhaust
Air Connection Screw: 1/4-19NPT
Noise Value: Less than 83DB
Suggested Air Tube Inner Diameter: Approx. 6.3mm / 0.2in
Category: Oscillating Pneumatic Eccentric Sander
Refueling Tips for Eccentric Pneumatic Grinder:
1. This machine is highly accurate. When it is running, the Speed is high. Once any fine sand or iron filings enter the movement, it may cause the blade to break and cause the machine to malfunction, so make sure that the air inlet is clean.
2. Be sure to use an oil-water separator and drain regularly to make sure that the machine is dry.
3. Before use every day, be sure to add 3~5 drops of pneumatic oil to the air inlet of the machine, and connect the air pump to idle.
Need To Know For Changing Disc Of Eccentric Pneumatic Grinder:
1. Locate the keyhole.
2. Insert the positioning pin into the lock hole and keep the pin still.
3. Turn right and replace the sand pad.
Size: Approx. 2.5cm / 1in
5.1cm / 2in
7.6cm / 3in

PackageList:
1 x Air Sander
3 x 1 Inch / 2 Inch / 3 Inch Polishing Disc
15 x 1 Inch / 2 Inch / 3 Inch Flat Sponge Pad
3 x 1 Inch / 2 Inch / 3 Inch Microfiber Mat
6 x 1 Inch / 2 Inch / 3 Inch Wool Pad
30 x 1 Inch / 2 Inch / 3 Inch Sandpaper
1 x
ProductSiteLaunchDate : 2023-12-23T00:00:00.000Z
Size : European style valve
UnitCount : 1