Specification Brand : WOD Tape BulletPoint1 : Banding each end of a pipe marker with directional flow arrow tape is recommended BulletPoint2 : Style 3C pipe markers measure 2-1/4 in. x 2-3/4 in. and fit pipe diameters less than 3/4 in. BulletPoint3 : High gloss, durable, flexible vinyl with a permanent cold temperature pressure sensitive acrylic adhesive BulletPoint4 : Good chemical, oil and water resistance Color : White Luminous Green CompatibleMaterial1 : Rubber CompatibleMaterial2 : Plastic CompatibleMaterial3 : Metal CompatibleMaterial4 : Paper CompatibleMaterial5 : Cement CompatibleMaterial6 : Wood CustomerPackageType : Standard Packaging ExternallyAssignedProductIdentifier1 : 742309105603 ExternallyAssignedProductIdentifier2 : 0742309105603 IncludedComponents : Pack of 5 Cards ItemDisplayDimensions_Height : 6.9 inches ItemDisplayDimensions_Length : 6.9 inches ItemDisplayDimensions_Width : 2 inches ItemDisplayWeight : 2.31 pounds ItemName : WOD AST20L Anti Slip Tape, Glow in The Dark - 2 inch x 60 ft. Safety Non Skid Roll for Stair Step Traction Tread Staircases Grips Adhesive Non Slip Strips Nonslip Walk, Indoor/Outdoor, Weatherproof ItemPackageDimensions_Height : 17.272 centimeters ItemPackageDimensions_Length : 5.588 centimeters ItemPackageDimensions_Width : 16.51 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : safety-tape Manufacturer : Tape Providers Material : Acrylic Adhesive, 60 grit silicon carbide ModelNumber : 7362-3C-PK NumberOfBoxes : 1 NumberOfItems : 1 PackageLevel : unit PartNumber : WOD-NST-20GL-BL ProductDescription : Glow in the Dark Anti-Slip Tape
WOD AST20L Non Slip Tape is waterproof because of its backing. This high traction non skid tape is 41 Mil. 60 Grit Silicon Carbide; surface is similar in feel to 60 grit sandpaper. Also, it is coated with an aggressive acrylic adhesive (better adhesive than synthetic rubber) that cannot be submerge into the water or applied underwater; when applying the surface needs to be dry and free of any debris so the adhesive bond can form properly.
How To Apply 1. Ensure that the surface is completely free from any debris. The best cleaning medium is a solvent such as isopropyl alcohol applied with a clean cloth. The surface should be dry and free from any loose particles.
2. Cut the tape to the desired length and round the corners with scissors.
3. Peel release paper and place in desired location.
- When the temperature is low, please slowly heated with a hair dryer, and gum with good results - If when applyed there is any gap that would allow the water to seep underneath of the tape, water will degrade the adhesive very quick.
Applications The anti slip tape with glowing strip can illuminate in night so that anti slip tapes can improve visibility during night, which can more efficiently prevent slipping and hurting, It is suitable for slippery places, such as floors, stairs, steps, walkways, ladders, sporting equipment, forklifts, trailers, ramps, scaffolding, buses, trucks and more.
Note: Sizes will be the tape industry standard metric sizes, ex. 12mm for every 1/2 inch of nominal value tape width (Rolls are give or take 5% wider or narrower than the nominal size). ProductSiteLaunchDate : 2018-12-29T03:34:17.450Z RecommendedUsesForProduct : Indoor, Outdoor Size : 2 in. x 60 ft. (50mm wide) SupplierDeclaredDgHzRegulation : not_applicable SurfaceRecommendation1 : Plastic SurfaceRecommendation2 : Cloth SurfaceRecommendation3 : Concrete SurfaceRecommendation4 : Wood UnitCount : 60 UnspscCode : 31201500 WaterResistanceLevel : waterproof