Cart 2 india

Specification
Brand : PRESCO PRODUCTS CO
BulletPoint1 : Texas Flagging Tape
BulletPoint2 : Country of manufacture: United States
BulletPoint3 : Manufacturer: PRESCO PRODUCTS CO
BulletPoint4 : Tapered edges to minimize "pick points" and traffic bumps
BulletPoint5 : Easy installation with minimal tools
Color : Black
CompatibleMaterial : Metal
CompatibleMaterial1 : Rubber
CompatibleMaterial2 : Plastic
CompatibleMaterial3 : Metal
CompatibleMaterial4 : Paper
CompatibleMaterial5 : Cement
CompatibleMaterial6 : Wood
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7436829509890
ExternallyAssignedProductIdentifier1 : 742309105658
ExternallyAssignedProductIdentifier2 : 0742309105658
ExternallyAssignedProductIdentifier3 : 00764083997670
IncludedComponents : Unit^Instruction Guide
ItemDisplayDimensions_Height : 6.9 inches
ItemDisplayDimensions_Length : 6.9 inches
ItemDisplayDimensions_Width : 2 inches
ItemDisplayWeight : 1.64 pounds
ItemName : Texas Flagging Tape, Blk, 300ft x 1-3/16In
ItemPackageDimensions_Height : 21 inches
ItemPackageDimensions_Length : 18 inches
ItemPackageDimensions_Width : 18 inches
ItemPackageQuantity : 1
ItemTypeKeyword : safety-tape
Manufacturer : PRESCO PRODUCTS CO
Material : Acrylic Adhesive, 60 grit silicon carbide
ModelNumber : TXBK-373
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : TXBK-373
ProductDescription : Glow in the Dark Anti-Slip Tape

WOD AST20LS Non Slip Tape is waterproof because of its backing. This high traction non skid tape is 39 Mil. 60 Grit Silicon Carbide; surface is similar in feel to 60 grit sandpaper. Also, it is coated with an aggressive acrylic adhesive (better adhesive than synthetic rubber) that cannot be submerge into the water or applied underwater; when applying the surface needs to be dry and free of any debris so the adhesive bond can form properly.

How To Apply
1. Ensure that the surface is completely free from any debris. The best cleaning medium is a solvent such as isopropyl alcohol applied with a clean cloth. The surface should be dry and free from any loose particles.

2. Cut the tape to the desired length and round the corners with scissors.

3. Peel release paper and place in desired location.

- When the temperature is low, please slowly heated with a hair dryer, and gum with good results
- If when applyed there is any gap that would allow the water to seep underneath of the tape, water will degrade the adhesive very quick.

Applications
The anti slip tape with glowing strip can illuminate in night so that anti slip tapes can improve visibility during night, which can more efficiently prevent slipping and hurting, It is suitable for slippery places, such as floors, stairs, steps, walkways, ladders, sporting equipment, forklifts, trailers, ramps, scaffolding, buses, trucks and more.

Properties
- Adhesive: Acrylic
- Thickness: 39 mils
- Release Liner: Paper
- Carrier/Backing: 60 Grit silicone carbide
- Adhesion: 60 oz/in
- Tensile Strength: 36 lbs/in
- Certifications: OSHA 1910.263(3)
- Core: 3 inch diameter

Note:
Sizes will be the tape industry standard metric sizes, ex. 12mm for every 1/2 inch of nominal value tape width (Rolls are give or take 5% wider or narrower than the nominal size).
ProductSiteLaunchDate : 2016-09-13T20:12:40.084Z
RecommendedUsesForProduct : Floor Marking
Size : 2 in. x 60 ft. - 1-Roll
StreetDate : 2018-10-11T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Concrete
SurfaceRecommendation3 : Stone
SurfaceRecommendation4 : Wood
UnitCount : 1
UnspscCode : 31201500
WaterResistanceLevel : waterproof