SpecificationBrand : J.V. Converting
BulletPoint1 : JVCC HZ-8 Hazard Warning Tape is a conformable soft PVC vinyl tape used for indoor aisle, exit, floor, restricted and hazardous barrier area marking.
BulletPoint2 : Hazard warning tape is designed to draw attention to where accidents are possible, or dangerous or off-limit areas in many industrial locations and applications. This tape is also useful as a striping tape to help identify tools or other items that need extra attention. JVCC HZ-8 helps to comply with OSHA requirements per paragraph 1910.144 of the Federal Register.
BulletPoint3 : JVCC HZ-8 striped hazard warning tape features a self-extinguishing synthetic rubber adhesive and it will not corrode copper, brass, steel, or aluminum. This tape is easy and quick to install and is manufactured to stand-up in demanding high traffic applications. JVCC HZ-8 Hazard Warning Tape is multi-purpose and useful for marking floors, walls, doors, tools, shelving, and other equipment.
BulletPoint4 : Color choices include Black/yellow which is typically used for physical hazard/caution, Red/white for fire equipment/first aid, Black/white for traffic/housekeeping, Green/white for decorative identification, and Magenta/yellow for radiation hazard.
BulletPoint5 : Carrier/Backing: polyvinyl chloride (PVC) film. Adhesive: synthetic rubber. Thickness: 6 mils (carrier, adhesive). Adhesion: 13.7 ounces per inch (to stainless steel test panel).
Color : Black With Yellow Stripes
CompatibleMaterial : Aluminum,industrial,pvc,rubber,stainless Steel,steel,vinyl
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
ExternallyAssignedProductIdentifier1 : 682821231179
ExternallyAssignedProductIdentifier2 : 0682821231179
ItemDisplayDimensions_Height : 0.71 inches
ItemDisplayDimensions_Length : 3.88 inches
ItemDisplayDimensions_Width : 3.88 inches
ItemDisplayWeight : 0.17 pounds
ItemName : JVCC Hazard Warning Tape [6 mils thick] (HZ-8): 3/4 in. x 18 yds. (Black with Yellow stripes)
ItemPackageDimensions_Height : 0.71 inches
ItemPackageDimensions_Length : 3.88 inches
ItemPackageDimensions_Width : 3.88 inches
ItemPackageQuantity : 1
ItemTypeKeyword : safety-tape
Language : english
Manufacturer : JVCC
Material : Polyvinyl Chloride
ModelNumber : Hazard Warning Tape [6 mils thick]
NumberOfItems : 1
PartNumber : HZ-8/BLKYS07518
ProductDescription :
JVCC HZ-8 Hazard Warning Tape is a conformable soft PVC vinyl tape used for indoor aisle, exit, floor, restricted and hazardous barrier area marking. Hazard warning tape is designed to draw attention to where accidents are possible, or dangerous or off-limit areas in many industrial locations and applications. This tape is also useful as a striping tape to help identify tools or other items that need extra attention. JVCC HZ-8 helps to comply with OSHA requirements per paragraph 1910.144 of the Federal Register.
JVCC HZ-8 striped hazard warning tape features a self-extinguishing synthetic rubber adhesive and it will not corrode copper, brass, steel, or aluminum. This tape is easy and quick to install and is manufactured to stand-up in demanding high traffic applications. JVCC HZ-8 Hazard Warning Tape is multi-purpose and useful for marking floors, walls, doors, tools, shelving, and other equipment.
Color choices include:
• Black/yellow which is typically used for physical hazard/caution
- Red/white for fire equipment/first aid
- Black/white for traffic/housekeeping
- Green/white for decorative identification
- Magenta/yellow for radiation hazard
The diagonal stripes on the tape are approximately 2-3/4" long (measured at the edge of the roll).
Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
ProductSiteLaunchDate : 2011-12-07T17:05:40.934Z
RecommendedUsesForProduct : Trucks & trailers reflective marking, vehicle safety marking, trail navigation, property identification, construction zones, emergency kits
Size : 3/4 in. x 18 yds. (18mm x 16.5m)
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Wood
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Concrete
SurfaceRecommendation3 : Metal
UnitCount : 1
UnspscCode : 31201500
WaterResistanceLevel : waterproof