Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Round Die: Thread size: #6-40 UNF; outside diameter (OD): 20mm / 0.79"; Thickness: 5mm / 0.2". Chip Pocket Quantity: 3. Made of alloy tool steel, with high hardness, high torque, good toughness, wear-resistance, high hardening capacity and tempering resistance.
BulletPoint2 : Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
BulletPoint3 : Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
BulletPoint4 : Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
BulletPoint5 : Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
BulletPoint6 : 1-1/2-Inch nominal pipe size
BulletPoint7 : Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
Color : Silver
ExternallyAssignedProductIdentifier1 : 0634769984747
ExternallyAssignedProductIdentifier2 : 634769984747
ExternallyAssignedProductIdentifier3 : 00095691379351
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : Unit^Instruction Guide
ItemDisplayWeight : 2.33 ounces
ItemName : uxcell Round Threading Dies #6-40 UNF, Alloy Tool Steel Machine Thread Repair Hand Tool
ItemPackageDimensions_Height : 13.4 centimeters
ItemPackageDimensions_Length : 0.2 centimeters
ItemPackageDimensions_Width : 9.8 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemShape1 : Round
ItemShape2 : Cone
ItemTypeKeyword : round-threading-dies
Manufacturer : uxcell
Material : Alloy Tool Steel
MeasurementSystem : SAE
ModelName : DIES, 12R 1-1/2 NPT HS SS
ModelNumber : a21061800ux0646
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : a21061800ux0646
ProductDescription : Specifications:
Thread Size: #6-40 UNF
Outside Diameter (OD): 20mm / 0.79"
Thickness: 5mm / 0.2"
Material: Alloy Tool Steel (9CrSi)
Chip Pocket Quantity: 3
Finish: Uncoated
Package Content: 1 x Round Threading Die


Descriptions:Made of alloy tool steel, it has high hardness, wear-resistance, high hardening capacity and tempering resistance.
The round die can process, correct or clean external threads. Perfect for rethreading existing threads in hard materials like metal, or making new threads in softer material such as plastic.
Conical locking hole, strong locking and not loose. Features the base substrate without any coatings, suitable for general purpose threading. Great for maintenance and repair work.
The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread.

ProductSiteLaunchDate : 2021-11-16T02:41:29.970Z
Size : #6-40 UNF
SpecificUsesForProduct : Machine
Style : Music
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500