Cart 2 india

Specification
Brand : Aceteel
BulletPoint : 【Material】Made of alloy steel, integrated molding processing technology, clear thread and good hardness.
BulletPoint1 : Compatibility: M10 x 1.5 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications.
BulletPoint2 : Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps.
BulletPoint3 : Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge.
BulletPoint4 : 8.5mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel.
BulletPoint5 : Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Color : Sliver
CuttingAngleString : 135 degrees
ExternallyAssignedProductIdentifier1 : 0769135410084
ExternallyAssignedProductIdentifier2 : 769135410084
FinishType : Uncoated
GpsrSafetyAttestation : 1
ItemDisplayWeight : 1.27 ounces
ItemName : Aceteel M8 x 0.5 Metric Round Die, Machine Thread Die M8 X 0.5mm Right Hand
ItemPackageDimensions_Height : 3.81 centimeters
ItemPackageDimensions_Length : 0.8128 centimeters
ItemPackageDimensions_Width : 2.8956 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : round-threading-dies
Manufacturer : Aceteel
Material : SKS
MeasurementSystem : Metric
ModelNumber : a22042200ux1108
NumberOfFlutes : 3
NumberOfItems : 999
NumberOfPieces : 1
PartNumber : RoundDie_M8X0.5
ProductDescription : Cutting Direction: Right Hand.
Material: Alloy Tool Steel.

Round Thread Die
Round dies are suitable for general purpose threading, widely used in thread repair or cleaning the external thread.

Use Suggestions:
1. Check the specification and outer diameter of the die and the clamping range of the die wrench to ensure that they match. Choose a suitable screwdriver to unscrew the fixing screws on the main body of the die wrench.
2. Lubricating oil should be applied when cutting, suitable lubricating oil is conducive to cutting or cooling, making cutting easier, it can help to extend die service life.
3. It needs to be reversed every 1/4~1/2 circle to facilitate the chip discharge from the chip hole.

ProductSiteLaunchDate : 2022-01-17T00:00:00.000-08:00
Size : M8 x 0.5mm
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Aluminum
UnitCount : 1
UnspscCode : 27110000