Cart 2 india

Specification
Brand : Foredom
BulletPoint1 : FOREDOM MP132P Motor Brush Pair
BulletPoint2 : For all 1/6 Horsepower M.SR, M.SRM, M.SRB, M.SRH, M.SRMH and M.SRBH models
BulletPoint3 : Three-motor system independently powers the sanding drums, variable-speed feed, and feed table
BulletPoint4 : Disc brake slows the machine quickly and will activate immediately to stop the machine in an emergency
BulletPoint5 : Auto thicknesser captures the piece of wood to give the user the exact starting thickness
BulletPoint6 : Variable-speed feed belt allows you to accurately dial in the exact feed speed to best suit your project
BulletPoint7 : Pneumatic sensor system controls the sanding belt oscillation to prevent the belt from running off the ends of the drums
Color : Yellow
ExternallyAssignedProductIdentifier : 8431277570033
ExternallyAssignedProductIdentifier1 : 0726898644118
ExternallyAssignedProductIdentifier2 : 726898644118
ExternallyAssignedProductIdentifier3 : 00662755878770
Horsepower : 0.16 watts
IncludedComponents : Sander, Sanding Belts (100 and 180 Grit), Tool Box, Tools
ItemName : Motor Brush Pair for, 1/6 HP SR, SRB, & SRM Series Motors
ItemPackageDimensions_Height : 5.3086 centimeters
ItemPackageDimensions_Length : 1.2954 centimeters
ItemPackageDimensions_Width : 3.6068 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-rotary-tools
Manufacturer : Foredom
Material : Metal
Material1 : Cast Iron
Material2 : Steel
MaximumCurrent : 100 amps
ModelName : WB-37
ModelNumber : MP132P
NumberOfItems : 1
PackageLevel : unit
PartNumber : MP132P
PowerSourceType : Corded Electric
ProductDescription : Pair of motor brushes for all 1/6 Horsepower M.SR, M.SRM, M.SRB, M.SRH, M.SRMH and M.SRBH models, both 115 Volt for domestic use and 230 Volt for international use. Earlier models of Series SR motors (built prior to November 2005) are 1/8HP and use different brushes, part number: MP2019P. Brushes should be checked for wear periodically. When new they are approximately 5/8” long. Replace them when they have worn to 1/4”. Be sure to replace both motor brushes even if one of them is less worn than the other. Learn More About Motor Brushes: All Foredom electric motors are the 2-pole type, and use one set of brushes, one on each side of the motor case, opposite the shaft end. The brushes are installed in brush holders, which are copper or brass tubes encased in plastic, with shallow plastic screw caps to retain, and provide access to, the brushes. The leads from the motor power cord are connected to the metal brush tubes, from which current flows into the brushes. A brush consists principally of a length of compressed graphite, with carefully controlled characteristics to provide the lowest possible resistance, low friction, and long life. A flexible copper pigtail is imbedded in the brush, terminated in a U or disc terminal. The pigtail is surrounded by a coil spring. The free end of the brush is curved, to match the curvature of the commutator. When the brush is inserted in the brush holder and the screw cap is in place, the spring maintains proper brush pressure on the commutator as the brush wears, and the pigtail terminal contacts the inner metal tube to provide a current path to the brush.
ProductSiteLaunchDate : 2019-05-29T07:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 230 volts