Cart 2 india

Specification
Brand : CRL
BulletPoint1 : Allows Easy Control of Sealant Application Thickness
BulletPoint2 : Compatible with All Cold-Applied Sealants
BulletPoint3 : Won't Adhere to Sealants; No Bond Breaker Needed
BulletPoint4 : Adheres to metal, porcelain, plastics and non-oily woods.
BulletPoint5 : Low volatility, RTV sealant
Color : Silver
CompatibleMaterial : Metal
CustomerPackageType : 1
ExternallyAssignedProductIdentifier : 5061055390169
Hazmat1 : auto-grounding
Hazmat10 : EG_NoAir
Hazmat11 : ES_NoAir
Hazmat12 : FR_NoAir
Hazmat13 : GB_NoAir
Hazmat14 : IN_NoAir
Hazmat15 : IT_NoAir
Hazmat16 : JP_NoAir
Hazmat17 : MX_NoAir
Hazmat18 : NL_NoAir
Hazmat19 : PL_NoAir
Hazmat2 : 3
Hazmat20 : SA_NoAir
Hazmat21 : SE_NoAir
Hazmat22 : SG_NoAir
Hazmat23 : TR_NoAir
Hazmat24 : US_NoAir
Hazmat25 : ZA_NoAir
Hazmat3 : AE_NoAir
Hazmat4 : AU_NoAir
Hazmat5 : BE_NoAir
Hazmat6 : BR_NoAir
Hazmat7 : CA_NoAir
Hazmat8 : CN_NoAir
Hazmat9 : DE_NoAir
IncludedComponents : Silicone
ItemForm : Foam
ItemName : 1-1/2" Closed Cell Backer Rod - 102 ft Box
ItemPackageDimensions_Height : 182.88 centimeters
ItemPackageDimensions_Length : 21.59 centimeters
ItemPackageDimensions_Width : 25.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rope-caulk
ItemTypeName : tesa Replacement Adapter Set BK164
Manufacturer : C.R. Laurence
Material : polyethylene foam
ModelName : FBA_EF112C
ModelNumber : CECOMINOD060194
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : FBA_EF112C
ProductDescription : Allows Easy Control of Sealant Application Thickness Won't Adhere to Sealants - No Bond Breaker Needed Compatible with All Cold-Applied Sealants Easy To Install CRL Closed Cell Backer Rod is a round, flexible, closed cell polyethylene foam with an exterior "skin" used as a backing and thickness control device for elastomeric and other cold-applied sealants. The backer rod becomes an integral part of the joint into which it is installed and therefore is available in a range of diameters to accommodate joints from 3/16 inch to 1-5/8 inch. It limits the depth of the sealant, therefore preventing excessive use of sealants. Because the sealant will not bond to the "skin" of the rod, it can stretch and recover with joint movement, with minimal stress being put on the points of adhesion to the substrate. Oversized. Ship at UPS Oversize Rate. Diameter of Rod: 1-1/2 in (38 mm) Feet per Package: 102 ft (31.1 m) Package Contents: 17 pieces 6 ft long each CRL Closed Cell Backer Rod will not absorb water or wick water to joint walls which could cause adhesive failure. It is compatible with cold-applied sealants and its round shape promotes the preferred "hour glass" shape for joint sealants. Being easily compressible, it withstands hot and cold temperature extremes from -45° to 160° F (-43° to 71° C). It can withstand dynamic joint movement without shifting from position or losing its "grip" on the joint walls. CRL Closed Cell Backer Rod is chemically inert, and resistant to oils, gasoline and solvents. It will not stain or "bleed" into sealant material. Backer rod is typically used in expansion/control joints where cold-applied sealants are used. These joints would normally be found in curtain walls, construction partitions, precast panels, parking decks, door and window frame perimeters, coping, floor and deck joints, horizontal traffic joints and building
ProductSiteLaunchDate : 2009-04-10T20:14:48-00:00
Size : 1-1/2"
StreetDate : 2024-04-19T00:00:01Z
Style : 102' (31.1 m)
SupplierDeclaredDgHzRegulation : unknown
SurfaceRecommendation : Walls, Floors
UnitCount : 1
WaterResistanceLevel : waterproof