Cart 2 india

Specification
Brand : The Shade & Shutter Factory
BulletPoint1 : Cordless Operation
BulletPoint2 : Room Darkening
BulletPoint3 : Includes Attached Valance
BulletPoint4 : Fully Lined
BulletPoint5 : Child & Pet Safe
CareInstructions : Spot Clean
Color : Navy
ExternallyAssignedProductIdentifier : 8164020102143
IncludedComponents : Mounting Hardware
ItemName : Cordless Room Darkening Fabric Roman Shade (Navy, 31x64)
ItemTypeKeyword : window-treatment-roman-shades
Manufacturer : The Shade & Shutter Factory
Material : Polyester
MountingType : Wall Mount
MountingType1 : Inside Mount
MountingType2 : Outside Mount
NumberOfItems : 1
NumberOfPanels : 1
Opacity : Blackout
OperationMode : Manual
PartNumber : XL-CM-TLRS-599.70041-332.09008-zongse
PatternType : Solid
ProductDescription : MOUNT TYPES

Inside mount: Inside mount requires at least 2 inches frame depth. For easier installation, usually the shade width should be at least 0.2 inch smaller than the window width. Choose the exact WINDOW INSIDE width and height to place order, we will reduce 0.2”on the order width when making the shade, so the final shade you get will be 0.2" less than your order width. If your window frame depth is less than 2 inch you can choose outside mount.

Outside mount: For better coverage, if there is enough space, usually the shade width should be 3" to 6" larger than the window outside width, shade height should be 5" to 10" larger than the window outside height, choose the FINAL SHADE width and height to place order, we will make NO deductions.

The hardware is attached in the package and it is good for inside mount and outside mount.

INSIDE MOUNT MEASUREMENT:

Step 1. Measure the inside frame width at three locations-top, middle, and bottom. Record the smallest of the 3 measurements and use that number as the width when ordering.
Step 2. Measure the height at 3 locations-left, middle and right side. Record the smallest of the 3 measurements and use the number as the height when ordering.
OUTSIDE MOUNT MEASUREMENT:

Step 1. Measure the outside frame width adding 6-10inch to be the outside mount width.
Step 2. Measure the outside frame height adding 5-10inch to be the outside mount height.
The overlap recommended is to allow appropriate coverage and avoid any light gaps.

Type: Cordless Zebra Roller Shade.
Feature: Thermal Light Filtering Waterproof
Material: Polyester Fabric
Installation: All Mounting Hardware Included.

ProductSiteLaunchDate : 2017-11-27T08:00:00.000Z
RoomType : Bedroom
RoomType1 : Office
RoomType2 : Kitchen
RoomType3 : Living Room
RoomType4 : Bedroom
RoomType5 : Dining Room
Size : 31x64
UnspscCode : 52131600
WaterResistanceLevel : not_water_resistant