Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Specifications: Model: #120H/ DIN/ISO 24AH; Material: Carbon Steel; Surface Treatment: Peening; Plate Thickness: 4.8inch; Pitch: 1-1/2inch; Width Between Inner Plates: 1.4inch (35.5mm); Pitch: 1.5inch (38mm); Pin Diameter: 0.43inch (11mm)
BulletPoint2 : Material: Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
BulletPoint3 : Appliance: This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
BulletPoint4 : How to Use: You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
BulletPoint5 : Note: Please pay attention to the size and model before ordering.
ExternallyAssignedProductIdentifier1 : 0768825173483
ExternallyAssignedProductIdentifier2 : 768825173483
GpsrSafetyAttestation : 1
IncludedComponents : 428H Connector Link * 6
ItemName : uxcell 4Pcs #120H/ DIN/ISO 24AH Chain Master Connector Link Roller, 1-1/2" Pitch Carbon Steel, Standard Connecting Split Links
ItemPackageDimensions_Height : 3.15 inches
ItemPackageDimensions_Length : 6.69 inches
ItemPackageDimensions_Width : 5.51 inches
ItemPackageQuantity : 4
ItemTypeKeyword : roller-chains
LoadCapacity : 5E+2 lbf
Manufacturer : uxcell
Material : Carbon Steel
ModelNumber : 428H Drive Chain 130 Link
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : f24042500ux0406
ProductDescription : Description:Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
Please pay attention to the size and model before ordering.
Specifications:
Model: #120H/ DIN/ISO 24AH
Material: Carbon Steel
Surface Treatment: Peening
Plate Thickness: 4.8inch
Pitch: 1-1/2inch
Width Between Inner Plates: 1.4inch (35.5mm)
Pitch: 1.5inch (38mm)
Pin Diameter: 0.43inch (11mm)


ProductSiteLaunchDate : 2024-07-09T17:32:44.456Z
Size : 130 Link
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31151600