Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Specifications: Model: #80H/ DIN/ISO 16AH; Material: Carbon Steel; Surface Treatment: Peening; Plate Thickness: 3.2inch; Pitch: 1inch; Width Between Inner Plates: 0.89inch (22.7mm); Pitch: 1inch (25.3mm); Pin Diameter: 0.31inch (7.8mm)
BulletPoint2 : Material: Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
BulletPoint3 : Appliance: This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
BulletPoint4 : How to Use: You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
BulletPoint5 : Note: Please pay attention to the size and model before ordering.
GpsrSafetyAttestation : 1
ItemLength : 5 feet
ItemName : uxcell 10Pcs #80H/ DIN/ISO 16AH Chain Master Connector Link Roller, 1" Pitch Carbon Steel, Standard Connecting Split Links
ItemPackageDimensions_Height : 2.95 inches
ItemPackageDimensions_Length : 6.69 inches
ItemPackageDimensions_Width : 4.72 inches
ItemPackageQuantity : 10
ItemTypeKeyword : roller-chains
Manufacturer : uxcell
Material : Carbon Steel
Material1 : Carbon Steel
Material2 : High Carbon Steel
PartNumber : f24042500ux0394
ProductDescription : Description:Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
Please pay attention to the size and model before ordering.
Specifications:
Model: #80H/ DIN/ISO 16AH
Material: Carbon Steel
Surface Treatment: Peening
Plate Thickness: 3.2inch
Pitch: 1inch
Width Between Inner Plates: 0.89inch (22.7mm)
Pitch: 1inch (25.3mm)
Pin Diameter: 0.31inch (7.8mm)


ProductSiteLaunchDate : 2024-07-09T17:32:45.364Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500