Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - 14 Teeth 5mm (0.2") thickness, 12mm (0.47") Bore Diameter, 9.525mm (3/8") Pitch, Keyway: 4mm (0.16"), Hub Height: 17mm (0.67"), Tooth Outer Diameter: 46mm (1.81").
BulletPoint2 : Material - Made of A3 steel (Q235), the teeth are high-frequency quenched, with high hardness and wear resistance.
BulletPoint3 : Feature - The chain Sprocket is usually mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees.
BulletPoint4 : Application - Used in hardware, milling machine, machinery and other occasions
BulletPoint5 : Notice - The surface has not been treated with anti-rust, so there may be rust on the surface, but this does not affect the use, you can use sandpaper to remove the rust spots before using.
Color : Black
ExternallyAssignedProductIdentifier1 : 0767908204731
ExternallyAssignedProductIdentifier2 : 767908204731
ItemName : HARFINGTON DIN/ISO 06B Roller Chain Sprocket 14T Pitch 3/8" 12mm Bore A3 Carbon Steel Motor Drive Gear
ItemPackageDimensions_Height : 15.7 centimeters
ItemPackageDimensions_Length : 2.5 centimeters
ItemPackageDimensions_Width : 9.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : roller-chain-sprockets
Manufacturer : HARFINGTON
Material : Carbon Steel
ModelNumber : hta220819hh1516
NumberOfItems : 1
NumberOfRows : 1
NumberOfTeeth : 14
PartNumber : hta220819hh1516
ProductDescription : 1. Sprockets are durable gears that are used in combination with roller chains to power all types of machinery. As the sprocket rotates, the teeth grab onto the chain and move other parts that interlock with the chain.
2. The speed of the sprocket should not over that allowed by a drive sprocket of the same size. Each roller sprocket has strong teeth that latch onto the chain. It is suggested that the sprocket has at least three teeth meshed with the chain.
3. Made of A3 steel (Q235), the teeth are high-frequency quenched, with high hardness and wear resistance.
4. Used in hardware, milling machine, machinery and other transmission occasions.
5. Note: The measurement allowed tolerance is+/-1-3cm. The surface has not been treated with anti-rust, so there may be rust on the surface, but this does not affect the use, you can use sandpaper to remove the rust spots before using.
ProductSiteLaunchDate : 2022-12-30T14:14:39.241Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500