Cart 2 india

Specification
Brand : AllGIFT
BulletPoint1 : Package included: 1Pc Chain Idler Sprocket
BulletPoint2 : Specifications: Number of Teeth: 12; Outside Diameter: 54mm / 2.13-inch; Bump Width: 3.5mm / 0.14-inch; Total Width: 14mm / 0.55-inch; Bore Diameter: 8mm / 0.31-inch; Pitch: 1/2-inch / 12.7mm; Tooth Width: 7.2mm / 0.29-inch; 1 x Idler Sprocket.
BulletPoint3 : Type: Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
BulletPoint4 : Material: The product is made of c45 carbon steel, the tooth long service life, easy to use.
BulletPoint5 : Customer Service:If you encounter any product problems, please feel free to contact us, we will provide you with quality after-sales service
ExternallyAssignedProductIdentifier1 : 0608071033776
ExternallyAssignedProductIdentifier2 : 608071033776
ItemName : Bearing Circlip 12 Tooth Durable 8mm Bore 1/2" Pitch Convex Idler Gear Practical Chain Idler Sprocket for ISO 08B Chains Machinery Transmission
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemTypeKeyword : roller-chain-sprockets
Manufacturer : AllGIFT
NumberOfItems : 1
PartNumber : FEBB2H52/S9EQL
ProductDescription :

100% Brand new and high quality

Type: Chain Idler Sprocket

Size: As Picture Show

Material: C45 Carbon Steel

Color: Black

Description:

Specifications: Number of Teeth: 12; Outside Diameter: 54mm / 2.13-inch; Bump Width: 3.5mm / 0.14-inch; Total Width: 14mm / 0.55-inch; Bore Diameter: 8mm / 0.31-inch; Pitch: 1/2-inch / 12.7mm; Tooth Width: 7.2mm / 0.29-inch; 1 x Idler Sprocket.

Type: Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.

Material: The product is made of c45 carbon steel, the tooth long service life, easy to use.

Note: The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.

Applications: Widely used in milling machine, drilling machine or other machinery transmission occasions.

Package included: 1Pc Chain Idler Sprocket

Note:

1. There is a 2-3% difference according to manual measurement. Please check the size carefully before you buy the item.

2. Please note that a slight color difference should be acceptable due to the light and screen.

3. A set assembled and sent out.

ProductSiteLaunchDate : 2024-06-21T03:39:11.313Z
SupplierDeclaredDgHzRegulation : not_applicable