Cart 2 india

Specification
Brand : Trusco
BulletPoint1 : Core wire diameter: φ0.08 inch (2.0 mm)
BulletPoint2 : bar length: 9.8 inch (250 mm)
BulletPoint3 : Current Range (A) Downward: 30 - 60
BulletPoint4 : current range (A) elevation / upward: 30 - 60 g Weight: 5 g 0
BulletPoint5 : Works well with thin sections and welds that require the highest possible machinability after welding
BulletPoint6 : Typical applications include automotive engine blocks, transmission and pump housings
BulletPoint7 : BHN 155 hardness
BulletPoint8 : Joins gray cast iron to other gray cast irons or other ferrous or non-ferrous metals
Color : Bright
ExternallyAssignedProductIdentifier : 4989999198133
ExternallyAssignedProductIdentifier1 : 032277453005
ExternallyAssignedProductIdentifier2 : 0032277453005
ExternallyAssignedProductIdentifier3 : 00032277453005
ExternallyAssignedProductIdentifier4 : 840338527349
ExternallyAssignedProductIdentifier5 : 689761180963
FitType : Universal
GradeRating : Industrial
ItemDisplayDimensions_Length : 92 centimeters
ItemDisplayWeight : 0.5 pounds
ItemForm : Rod
ItemName : TRUSCO TSR2-205 Welding Rod for General Mild Steel, Core Diameter 0.08 inches (2.0 mm), Rod Length 9.8 inches (250 mm)
ItemPackageDimensions_Height : 2.8 centimeters
ItemPackageDimensions_Length : 27 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemPackageQuantity : 1
ItemShape : Cylindrical
ItemTypeKeyword : arc-welding-rods
LineWeight : 1/2-Pound
Manufacturer : トラスコ中山(TRUSCO)
Material : Nickel
ModelName : KB800040093
ModelNumber : TSR2205
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : TSR2205
Pattern : TSR2-205
ProductDescription : Instructions for Welding Titanium: Titanium is generally welded using the same techniques as stainless steel, however, titanium requires much greater weldjoint cleanliness along with extensive inert gas shielding. Cleaning: Grind or file away mill scale. Remove surface oxides with SÜA Pickling Paste or 35% nitric – 5% hydrofluoric acid solution at room temperature. Remove any grease or oil with a nonchlorinated degreasing solvent, methanol acetone, or methyl-ethyl-ketone. Light oil can be removed by washing with a household abrasive or detergent. Fitup: Clamp joints where possible. Tack welds require the same care as other welds. Equipment: Use a constant-current power source (DCEN) for GTAW with a contactor for arc start and stop. High-frequency starter for manual welding, water-cooled GTA torch with gas lens and ¾-inch (#12) gas cup, 2% Thoriated, 2% Ceriated, 2% Lanthanum or Rare Earth tungsten Note: A reactive metal, titanium is sensitive to embrittlement by oxygen, nitrogen and hydrogen. Consequently, the molten weld metal must be protected against atmospheric contamination by holding the shielding gas over the weld zone until it cools down to 600°F
ProductSiteLaunchDate : 2012-08-07T09:06:45.916Z
Size : 心線径2.0mm
Style : Rod length: 9.8 inches (250 mm)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 12 volts
Wattage : 8 watts