Cart 2 india

Specification
Brand : SÜA
BulletPoint : MIG Welding Gas Nozzle 24A-50,Package Including:5pcs
BulletPoint1 : SÜA RG45, (RG-45), is a copper-coated, low-carbon steel, oxyfuel gas welding rod used for welding ordinary low carbon steel.
BulletPoint2 : RG45 weld deposits are ductile and porosity-free. Commonly used on steel sheets, plates, pipes, castings, and architectural projects
BulletPoint3 : Its typical minimum weld tensile strength is 45 ksi and it conforms to AWS A5.2 R45. RG45 - No flux required
BulletPoint4 : ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***
BulletPoint5 : Available Diameters: 1/16", 3/32", 1/8" and 5/32" - Available Packages: 1 Lb, 2 Lb, 5 Lb and 10 Lb. Select your choice from the size menu options.
ExternallyAssignedProductIdentifier : 00840338556592
ExternallyAssignedProductIdentifier1 : 0662991614217
ExternallyAssignedProductIdentifier2 : 662991614217
ExternallyAssignedProductIdentifier3 : 0640024878508
ExternallyAssignedProductIdentifier4 : 0716352082402
ExternallyAssignedProductIdentifier5 : 00716352082402
ItemDisplayDimensions_Length : 4.5 inches
ItemDisplayWeight : 10 pounds
ItemForm : Rod
ItemName : SÜA® - RG-45 - Oxy-Acetylene Carbon Steel Welding Rod (R45) - 36" x 5/32" (10 Lb)
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 10
ItemShape : Rectangular
ItemTypeKeyword : arc-welding-rods
Manufacturer : Mundaka Technologies Inc
Material : Steel
Material1 : Copper
Material2 : Brass
ModelNumber : 1
NumberOfItems : 1
PartNumber : SWT-RG45R10x532_10
ProductDescription : Recommended Oxyacetylene Procedure: Bevel cracks or heavy sections where possible. Clean the area to be welded as thoroughly as possible. Use a neutral or slightly reducing flame. The extent of the excess fuel gas is measured by the length of the “streamer” or “feather” of unburned fuel gas visible at the extremity of the inner cone. The “streamer” should measure about 1/8 to 1/4 of the length of the inner cone of the flame. Excessively long “streamers” should be avoided since they may add carbon to the weld metal. If forehand welding (welding rod precedes the torch flame), distribute the heat and molten weld metal by using opposing oscillating motions of the flame and welding rod. If backhand welding (welding rod is interposed between the flame and molten metal), then there is significantly less manipulation of the flame or welding rod.
ProductSiteLaunchDate : 2022-11-12T13:53:20.445Z
Size : 5/32" - (10 Lb)
SpecificationMet : Yes, it meets aerospace industry standards
Style : 5PK - GAS NOZZLE
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
ValveType : Nozzle Valve