Cart 2 india

Specification
Brand : SÜA
BulletPoint1 : SÜA RG45, (RG-45), is a copper-coated, low-carbon steel, oxyfuel gas welding rod used for welding ordinary low carbon steel.
BulletPoint2 : RG45 weld deposits are ductile and porosity-free. Commonly used on steel sheets, plates, pipes, castings, and architectural projects
BulletPoint3 : Its typical minimum weld tensile strength is 45 ksi and it conforms to AWS A5.2 R45. RG45 - No flux required
BulletPoint4 : ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***
BulletPoint5 : Available Diameters: 1/16", 3/32", 1/8" and 5/32" - Available Packages: 1 Lb, 2 Lb, 5 Lb and 10 Lb. Select your choice from the size menu options.
Color : Gold & Silver
ExternallyAssignedProductIdentifier : 00840338556554
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 40 inches
ItemDisplayDimensions_Width : 4 inches
ItemDisplayWeight : 10 pounds
ItemForm : Rod
ItemName : SÜA® - RG-45 - Oxy-Acetylene Carbon Steel Welding Rod (R45) - 36" x 1/8" (10 Lb)
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 40 inches
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : arc-welding-rods
Manufacturer : Mundaka Technologies Inc
Material : Steel
ModelName : Oumefarmngkv30ycz
ModelNumber : Oumefarmngkv30ycz
NumberOfItems : 2
PartNumber : SWT-RG45R10x18_10
PowerSourceType : ac/dc
ProductDescription : Recommended Oxyacetylene Procedure: Bevel cracks or heavy sections where possible. Clean the area to be welded as thoroughly as possible. Use a neutral or slightly reducing flame. The extent of the excess fuel gas is measured by the length of the “streamer” or “feather” of unburned fuel gas visible at the extremity of the inner cone. The “streamer” should measure about 1/8 to 1/4 of the length of the inner cone of the flame. Excessively long “streamers” should be avoided since they may add carbon to the weld metal. If forehand welding (welding rod precedes the torch flame), distribute the heat and molten weld metal by using opposing oscillating motions of the flame and welding rod. If backhand welding (welding rod is interposed between the flame and molten metal), then there is significantly less manipulation of the flame or welding rod.
ProductSiteLaunchDate : 2022-11-12T13:53:17.868Z
Size : 1/8" - (10 Lb)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 2.8219
UnspscCode : 23271800