Cart 2 india

Specification
Brand : Polyvance
BulletPoint : 100% pure homogeneous HDPE material
BulletPoint1 : 15% glass fibers for additional tensile strength.
BulletPoint2 : Squared edges resist curling when welding
BulletPoint3 : Works with hot air, nitrogen and airless plastic welders.
BulletPoint4 : ►【APPLICATION】-PP welding rod suitable for PP sheet metal joints, such as front and rear baffles of automobiles. Inner panels (brands) of motorcycles, welding of automobile bumpers.
BulletPoint5 : ►【PACKAGE CONTENT】- Pack of 3pcs 5mm Wide, 3mm Thick,1Meter PP Plastic Welding Rods
BulletPoint6 : High toughness at low temperatures with a nominal 1% Ni or less
BulletPoint7 : Welding positions: all
BulletPoint8 : Suitable for ASTM A588 weathering steel requiring good atmospheric corrosion resistance and NACE applications
BulletPoint9 : Conformances: AWS A5.28/A5.28M: 2005 ER80S-Ni1
Color : Black
ExternallyAssignedProductIdentifier : 4260557847800
ExternallyAssignedProductIdentifier1 : 0694687006549
ExternallyAssignedProductIdentifier2 : 694687006549
IncludedComponents : 10lbs. Tube Lincoln ER80S-Ni1 Mild Steel Welding Filler Rod 1/8" 3.2mm
ItemDisplayWeight : 0.25 pounds
ItemForm : Rod
ItemName : Polyvance Nylon and 15% Glass Fiber Welding Rod, 3/8" x 1/16" x 12", 30 ft., Black
ItemPackageDimensions_Height : 21.59 centimeters
ItemPackageDimensions_Length : 1.524 centimeters
ItemPackageDimensions_Width : 16.51 centimeters
ItemPackageQuantity : 1
ItemShape : Straight
ItemTypeKeyword : arc-welding-rods
Manufacturer : Polyvance
Material : nylon
ModelName : Plastic Welding Rods
ModelNumber : KB8KT04051
NumberOfBoxes : 1
NumberOfItems : 50
PartNumber : R21-04-03-BK
PowerSourceType : fuel_powered
ProductDescription : If you have a broken plastic part the has the markings "PA+GF15", that tells you that the part is "Polyamide" (PA) plus 15% glass fibers (GF). (Polyamide is the "generic" name for "Nylon".) It may have markings like "PA+GF20" or "PA+GF30" or some other number next to GF. Whatever number follows the "GF" is the percentage of glass fibers that are in the nylon. Since PA+GF15 is the only glass-filled nylon we offer, this would be your best option whenever you have a broken, glass-fiber reinforced nylon part. Nylon is a plastic with a very high melting point and is used in places where high temperatures are present, like radiator tanks and intake manifolds. Nylon has a very distinct smell when melted. Because of the high melting point of nylon, it is often necessary to preheat the area you are going to weld with a heat gun. This will make welding much quicker. Because of the pressure and temperatures on nylon radiator tanks, it is very important that the rod fuse with the base material. Anything less than a complete fusion repair will result in a money-losing comeback job. This is a 30 ft. (9.1 m) package. Each rod is 1 ft. (30 cm) long and 3/8th inch (9.5 mm) wide by 1/16th inch (1.6 mm) thick.
ProductSiteLaunchDate : 2021-07-14T20:32:52.998Z
SafetyDataSheetUrl : https://www.polyvance.com/_pdf/SDSR21-04-03-BK.pdf
Size : 5mm x 3mm x 1M,3pcs
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 16