Specification Brand : KUNWU BulletPoint1 : Low carbon (0.03 % maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium. BulletPoint2 : The 2.5 % molybdenum content of 316L gives the weld deposit excellent corrosion resistance at elevated temperatures against “pitting” that may be caused by sulfuric, phosphoric and acetic acids. BulletPoint3 : ER316L is usually used to 18% chromium – 12% nickel – 2.5% molybdenum austenitic stainless steels such as 316 and 317 but with a low ferrite, it can also be used for welding 304/304L to 316/316L stainless steels in cryogenic service at temperatures down to -452 ℉ (-269 ℃). BulletPoint4 : Primarily used for welding low-carbon molybdenum-bearing austenitic alloys. Common applications include equipment that manufacturers rayon, dye, paper, ink, rubber, bleach, photographic chemicals and on the sealing faces of valves and fittings for acid, gas, water and steam equipment. BulletPoint5 : Welding Positions: All Positions. Color : Black ExternallyAssignedProductIdentifier : 4533707501861 ExternallyAssignedProductIdentifier1 : 088381528016 ExternallyAssignedProductIdentifier2 : 0088381528016 IncludedComponents : (10) Welding Rod, HDPE ItemDisplayWeight : 2 pounds ItemForm : Rod ItemName : KUNWU Stainless Steel TIG Welding Rods ER316L 1/8" x 36" 2Lb (2, 1/8 inch (0.125 inch), 3.2 mm) ItemPackageDimensions_Height : 36.2 inches ItemPackageDimensions_Length : 0.8 inches ItemPackageDimensions_Width : 0.8 inches ItemPackageQuantity : 2 ItemShape : Straight ItemTypeKeyword : arc-welding-rods Manufacturer : Kunwu Advanced Materials Material : Stainless Steel ModelName : Welding Rod, HDPE, 10/pk ModelNumber : KB8KT04052 NumberOfBoxes : 1 NumberOfItems : 1 NumberOfPockets : 2 OeManufacturer : Polyvance PackageLevel : unit PartNumber : KB8KT04052 PocketDescription : Flap Pocket PowerSourceType : ac_dc ProductDescription : ER316L. This classification is the same as ER316, except for the carbon content. Low carbon (0.03 percent maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium. This filler metal is primarily used for welding low-carbon molybdenum-bearing austenitic alloys. This low-carbon alloy, however, is not as strong at elevated temperature as the niobium-stabilized alloys or Type ER316H. ProductSiteLaunchDate : 2020-08-15T07:00:00.000Z Size : 1/8 inch (0.125 inch), 3.2 mm SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 32 WarrantyDescription : No Manufacturer Warranty