Cart 2 india

Specification
Brand : KUNWU
BulletPoint1 : Low carbon (0.03 % maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium.
BulletPoint2 : The 2.5 % molybdenum content of 316L gives the weld deposit excellent corrosion resistance at elevated temperatures against “pitting” that may be caused by sulfuric, phosphoric and acetic acids.
BulletPoint3 : ER316L is usually used to 18% chromium – 12% nickel – 2.5% molybdenum austenitic stainless steels such as 316 and 317 but with a low ferrite, it can also be used for welding 304/304L to 316/316L stainless steels in cryogenic service at temperatures down to -452 ℉ (-269 ℃).
BulletPoint4 : Primarily used for welding low-carbon molybdenum-bearing austenitic alloys. Common applications include equipment that manufacturers rayon, dye, paper, ink, rubber, bleach, photographic chemicals and on the sealing faces of valves and fittings for acid, gas, water and steam equipment.
BulletPoint5 : Welding Positions: All Positions. Totally 2 Lbs of ER316L TIG welding rods packaged in a PVC tube.
BulletPoint6 : High toughness at low temperatures with a nominal 1% Ni or less
BulletPoint7 : Welding positions: all
BulletPoint8 : Suitable for ASTM A588 weathering steel requiring good atmospheric corrosion resistance and NACE applications
BulletPoint9 : Conformances: AWS A5.28/A5.28M: 2005 ER80S-Ni1
ExternallyAssignedProductIdentifier : 4260557847800
IncludedComponents : 10lbs. Tube Lincoln ER80S-Ni1 Mild Steel Welding Filler Rod 1/8" 3.2mm
ItemName : KUNWU Stainless Steel TIG Welding Rods ER316L 0.045" x 36" - 2Lb (2, 0.045 inch, 1.2 mm)
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 37 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 2
ItemShape : Straight
ItemTypeKeyword : arc-welding-rods
Manufacturer : Kunwu Advanced Materials
Material : Stainless Steel
ModelName : KB8KT04012
ModelNumber : KB8KT04012
NumberOfBoxes : 1
PartNumber : KB8KT04012
PowerSourceType : fuel_powered
ProductDescription : ER316L. This classification is the same as ER316, except for the carbon content. Low carbon (0.03 percent maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium. This filler metal is primarily used for welding low-carbon molybdenum-bearing austenitic alloys. This low-carbon alloy, however, is not as strong at elevated temperature as the niobium-stabilized alloys or Type ER316H.
ProductSiteLaunchDate : 2020-08-15T14:00:00.000Z
Size : 0.045 inch, 1.2 mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 32