Cart 2 india

Specification
Brand : KUNWU
BulletPoint1 : Low carbon (0.03 % maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium.
BulletPoint2 : The 2.5 % molybdenum content of 316L gives the weld deposit excellent corrosion resistance at elevated temperatures against “pitting” that may be caused by sulfuric, phosphoric and acetic acids.
BulletPoint3 : ER316L is usually used to 18% chromium – 12% nickel – 2.5% molybdenum austenitic stainless steels such as 316 and 317 but with a low ferrite, it can also be used for welding 304/304L to 316/316L stainless steels in cryogenic service at temperatures down to -452 ℉ (-269 ℃).
BulletPoint4 : Primarily used for welding low-carbon molybdenum-bearing austenitic alloys. Common applications include equipment that manufacturers rayon, dye, paper, ink, rubber, bleach, photographic chemicals and on the sealing faces of valves and fittings for acid, gas, water and steam equipment.
BulletPoint5 : Welding Positions: All Positions. Totally 10 Lbs of ER316L TIG welding rods packaged in a rectangle PVC tube.
Color : 5mm Turbular Nozzle 1pc
ExternallyAssignedProductIdentifier1 : 0883749632004
ExternallyAssignedProductIdentifier2 : 883749632004
IncludedComponents : PVC Tube
ItemDisplayWeight : 21.6 grams
ItemForm : Rod
ItemName : KUNWU Stainless Steel TIG Welding Rods ER316L 0.045" x 36" - 10Lb (10, 0.045 inch, 1.2 mm)
ItemPackageDimensions_Height : 92.202 centimeters
ItemPackageDimensions_Length : 3.302 centimeters
ItemPackageDimensions_Width : 4.572 centimeters
ItemPackageQuantity : 10
ItemShape : Straight
ItemTypeKeyword : arc-welding-rods
Manufacturer : Kunwu Advanced Materials
Material : Stainless Steel
ModelName : KB8KT04014
ModelNumber : KB8KT04014
NumberOfBoxes : 1
OeManufacturer : Polyvance
PartNumber : KB8KT04014
ProductDescription : ER316L. This classification is the same as ER316, except for the carbon content. Low carbon (0.03 percent maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium. This filler metal is primarily used for welding low-carbon molybdenum-bearing austenitic alloys. This low-carbon alloy, however, is not as strong at elevated temperature as the niobium-stabilized alloys or Type ER316H.
ProductSiteLaunchDate : 2020-08-15T14:00:00.000Z
Size : 0.045 inch, 1.2 mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 160