Cart 2 india

Specification
Brand : Forney
BulletPoint1 : The product is 13PK 3/32" NI Weld Rod
BulletPoint2 : Easy to use
BulletPoint3 : The product is manufactured in China
BulletPoint4 : All position high nickel content electrode with an extruded coating for welding cast iron or joining cast iron to dissimilar metals
BulletPoint5 : Works well with thin sections and welds that require the highest possible machinability after welding
BulletPoint6 : Typical applications include automotive engine blocks, transmission and pump housings
BulletPoint7 : BHN 155 hardness
BulletPoint8 : Joins gray cast iron to other gray cast irons or other ferrous or non-ferrous metals
Color : Bright
ExternallyAssignedProductIdentifier : 6973979611536
ExternallyAssignedProductIdentifier1 : 032277453005
ExternallyAssignedProductIdentifier2 : 0032277453005
ExternallyAssignedProductIdentifier3 : 00032277453005
ExternallyAssignedProductIdentifier4 : 840338527349
ExternallyAssignedProductIdentifier5 : 689761180963
FitType : Universal
GradeRating : Industrial
ItemDisplayDimensions_Length : 92 centimeters
ItemDisplayWeight : 0.5 pounds
ItemForm : Rod
ItemName : Forney 45300 Super 99-Percent Nickel Cast Specialty Rod, 3/32-Inch, 1/2-Pound
ItemPackageDimensions_Height : 38.7096 centimeters
ItemPackageDimensions_Length : 1.1938 centimeters
ItemPackageDimensions_Width : 3.9878 centimeters
ItemPackageQuantity : 1
ItemShape : Cylindrical
ItemTypeKeyword : arc-welding-rods
LineWeight : 1/2-Pound
Manufacturer : Forney
Material : Nickel
ModelName : KB800040093
ModelNumber : 45300
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 45300
ProductDescription : Instructions for Welding Titanium: Titanium is generally welded using the same techniques as stainless steel, however, titanium requires much greater weldjoint cleanliness along with extensive inert gas shielding. Cleaning: Grind or file away mill scale. Remove surface oxides with SÜA Pickling Paste or 35% nitric – 5% hydrofluoric acid solution at room temperature. Remove any grease or oil with a nonchlorinated degreasing solvent, methanol acetone, or methyl-ethyl-ketone. Light oil can be removed by washing with a household abrasive or detergent. Fitup: Clamp joints where possible. Tack welds require the same care as other welds. Equipment: Use a constant-current power source (DCEN) for GTAW with a contactor for arc start and stop. High-frequency starter for manual welding, water-cooled GTA torch with gas lens and ¾-inch (#12) gas cup, 2% Thoriated, 2% Ceriated, 2% Lanthanum or Rare Earth tungsten Note: A reactive metal, titanium is sensitive to embrittlement by oxygen, nitrogen and hydrogen. Consequently, the molten weld metal must be protected against atmospheric contamination by holding the shielding gas over the weld zone until it cools down to 600°F
ProductSiteLaunchDate : 2005-08-17T00:00:00-00:00
Size : 3/32" - 10 Rods
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 12 volts
Wattage : 8 watts