Cart 2 india

Specification
Brand : Forney
BulletPoint1 : The product is LB 3/32 7014 Weld Rod
BulletPoint2 : Easy to use
BulletPoint3 : All position welding rod with digging arc, deep penetration on dirty or rust materials
BulletPoint4 : Ideal for joints requiring deep penetration such as square edge butt welds
BulletPoint5 : Minimal surface preparation required.Excellent for galvanized steel and rusty/oily steel in maintenance
Color : Silver
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8279150425557
ExternallyAssignedProductIdentifier1 : 032277320017
ExternallyAssignedProductIdentifier2 : 7147905863118
ExternallyAssignedProductIdentifier3 : 7535001048971
ExternallyAssignedProductIdentifier4 : 0032277320017
ExternallyAssignedProductIdentifier5 : 00032277320017
IncludedComponents : Welding Rod
ItemDisplayWeight : 1 pounds
ItemForm : Rod
ItemName : Forney 32001 E7014 Welding Rod, 3/32-Inch, 1-Pound
ItemPackageDimensions_Height : 2.032 centimeters
ItemPackageDimensions_Length : 35.56 centimeters
ItemPackageDimensions_Width : 4.572 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : arc-welding-rods
Manufacturer : Forney
Material : Metal
ModelName : 32001
ModelNumber : 32001
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 32001
PowerSourceType : Hand Powered
ProductDescription :

Product : Flux Core welding rods

Material : Aluminum 

Diameter : 1.6mm, Length : 33cm

Feature : No need to solder powder, no need to use other aluminum alloys as flux or salt-based flux. Very convenient and easy to solder.

Melting point : about 550℃ (1022℉)

Usage : For aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good forgeability & good corrosion resistance.

How to use

Step 1: Cleaning and polished the physical surface.

Step 2: Heating the surface of the base material, until the temperature of the base material to the operating temperature of 550℃ (1022℉), so you can rely on the base metal heat transfer welding wire to form welds, should not use the flame to burn wire directly, when the surface temperature of the base metal is sufficient, the wire can flow well and penetrate into the metal capillary.

Step 3: When repairing thin aluminum, as long as the base metal heated to the appropriate working temperature, and then use the wire back and forth friction melting to form a weld.

Step 4: Use propane gas to weld small object, use industrial gas or induction heating device to heat and weld big object, natural slow cooling after welding.

ProductSiteLaunchDate : 2006-09-10T14:07:07-00:00
Size : Pack of 1
Style : 7014
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1