Cart 2 india

Specification
Brand : ALUMALOY
BulletPoint1 : REPAIRS: Alumaloy repairs or fabricates virtually anything made of aluminum, pot metal, or galvanized steel. Use something as simple as a propane torch on up. No Flux needed! You can repair boats, props, storm doors, gutters, antiques, tools, condensers, molds, rims, air conditioning lines, refrigeration coils, bell housing, pontoons, transmission cases, and so much more.
BulletPoint2 : EASY TO USE: Alumaloy is as EASY as 1-2-3. Simply clean the base metal, heat the base metal, NOT THE Alumaloy ROD, repair your way into hundreds of dollars of savings. Please refer to instructional video.
BulletPoint3 : NO WORRYING: Alumaloy melts at 728 degrees Fahrenheit giving you the ability to repair the thinnest to the thickest metals without worrying about war-page or distortion. Alumaloy even repairs pot metal; one of the most difficult non ferrous metals in the world to repair!
BulletPoint4 : PERMANENT: Alumaloy is specially formulated to make strong permanent repairs that can last a lifetime. Specs include: Tensile Strength lbs/ sq.in 39,000, Compression Str.lb/sq.in 60,000, shelf life is indefinite. Alumaloy is a welcome addition to any tool box and 100% guaranteed to work for you. Each rod is approximately 1/8" x 18" long.
BulletPoint5 : MADE IN THE USA: Alumaloy is an environmentally friendly product. Giving you the ability to repair more and throw out less. Saving money and the planet at the same time. Unlike other specialty repair rods, Alumaloy contains no lead, no tin and no cadmium. Alumaloy is proudly made in the United States of America!
Color : Silver
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8279150425557
ItemForm : Rod
ItemName : Alumaloy Rods - Easy, Simple Welding Rods, Aluminum Repair Rods, Solution Welding Rods (15)
ItemPackageDimensions_Height : 46.99 centimeters
ItemPackageDimensions_Length : 1.905 centimeters
ItemPackageDimensions_Width : 2.54 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : arc-welding-rods
Manufacturer : Alumaloy
ModelNumber : ALUMVAR
PartNumber : ALUMVAR
ProductDescription :

Product : Flux Core welding rods

Material : Aluminum 

Diameter : 1.6mm, Length : 33cm

Feature : No need to solder powder, no need to use other aluminum alloys as flux or salt-based flux. Very convenient and easy to solder.

Melting point : about 550℃ (1022℉)

Usage : For aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good forgeability & good corrosion resistance.

How to use

Step 1: Cleaning and polished the physical surface.

Step 2: Heating the surface of the base material, until the temperature of the base material to the operating temperature of 550℃ (1022℉), so you can rely on the base metal heat transfer welding wire to form welds, should not use the flame to burn wire directly, when the surface temperature of the base metal is sufficient, the wire can flow well and penetrate into the metal capillary.

Step 3: When repairing thin aluminum, as long as the base metal heated to the appropriate working temperature, and then use the wire back and forth friction melting to form a weld.

Step 4: Use propane gas to weld small object, use industrial gas or induction heating device to heat and weld big object, natural slow cooling after welding.

ProductSiteLaunchDate : 2020-04-30T13:48:40.941Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 15