Cart 2 india

Specification
Brand : Heloawei
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
ItemName : 10Pcs Gouging Carbon Rods ，Round Copper Coated Gouging Carbon Electrodes ，5mm-12mm Diameter Option, 355mm Length (D : 8mm x L : 355mm)
ItemTypeKeyword : arc-welding-rods
Manufacturer : Heloawei
ModelNumber : D : 8mm x L : 355mm
NumberOfItems : 10
ProductDescription : The component has the advantages of hard and brittle texture, small expansion coefficient, ability to cold and heat, not easy to deform, good chemical stability, strong acid resistance, no reaction with strong acid, poor alkali resistance, and can corrode and decompose the rod at high temperature.

The bending strength of carbon rod increases with the increase of component temperature. The resistance value of the component is specified at 25 microohms according to the ministerial standard. Meter measured, true reflected by the electrical resistance.

The surface load current density of the element is closely related to the raw material formula and pressing density of the black carbon rod, and can be adjusted arbitrarily according to needs.

Carbon rod instructions:

The carbon rod must be kept dry, wet must be dried before use.

When used for DC power supply, the carbon rod is connected to the positive electrode of the power supply, and the working electrode is connected to the negative electrode.

The compressed air pressure to maintain 0.5-1.6MPa.

Tthe arc distance between the carbon rod and the workpiece is about 3mm, and the carbon rod exposed fixture is about 100mm.

The carbon rod and the workpiece into a 45° Angle, and along the tangent (or straight) direction planing.

The carbon rod must be well ventilated when used. Operate according to the working current.
ProductSiteLaunchDate : 2024-03-28T06:21:09.541Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 23271800