Cart 2 india

Specification
Brand : Speedway Motors
BulletPoint : ROD END (C) 2-PC CARBONM-R 12MM-12MM
BulletPoint1 : These rod ends are made from fully polished investment cast stainless steel for superior strength and durability
BulletPoint2 : 5/8"-18 RH threaded shank allows for length adjustment of your bar assemblies
BulletPoint3 : Polyurethane bushing with 1/2" ID steel sleeve stiffens the suspension link while also absorbing road vibrations for a smooth and comfortable ride
BulletPoint4 : Beautifully polished stainless steel finish looks perfect on any show car or hot rod
BulletPoint5 : Available in straight, 7 degree, or 10 degree shank which make these perfect for fabricating 4 bar suspensions
Color : Natural
ExteriorFinish : Polished
ExternallyAssignedProductIdentifier1 : 0800199490619
ExternallyAssignedProductIdentifier2 : 800199490619
ExternallyAssignedProductIdentifier3 : 00806990016324
FitType : Universal Fit
IncludedComponents : Tube End CM - Weld-In 1-1/4 x .095 3/4-16 LH
ItemDisplayDimensions_Diameter : 1.5 inches
ItemName : Stainless 4-Bar Rod End, 5/8-18 RH Thread, Straight Shank
ItemPackageDimensions_Height : 16.5 centimeters
ItemPackageDimensions_Length : 3.1 centimeters
ItemPackageDimensions_Width : 9.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rod-end-bearings
Manufacturer : Speedway Motors
Material : Stainless Steel
MeasurementSystem : Inch
ModelName : Speedway Motors
ModelNumber : 2708L-H
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 91008051-STR
ProductDescription : Don't settle for a weak 4-bar end made out of a piece of tubing welded to a bolt. These Speedway rod ends are made from fully polished investment cast stainless steel for superior strength and durability. All rod ends feature a 5/8"-18 RH threaded shank and the polyurethane bushing has a steel sleeve that accepts a 1/2" bolt. Rod ends come in three different configurations: Straight Shank Mounting eye is perpendicular to threaded shank 5/8"-18 RH threads Center of mounting eye to end of threads is 2-7/8" 7° Shank Mounting eye is offset 7° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 7° angle) 5/8"-18 RH threads Center of mounting eye to end of threads on short side is 2-13/16" Center of mounting eye to end of threads on long side is 2-15/16" 11° Shank Mounting eye is offset 11° from perpendicular to threaded shank (with the bushing side down, the stud will be angled up at a 11° angle) 5/8"-18 RH threads. Choose from straight, 7° or 11° angled shanks.
ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2017-09-15T17:04:49.482Z
Size : Straight
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1