Cart 2 india

Specification
Brand : HIPICCO
BulletPoint1 : 99502H-2RS Sealed Bearings,(I.D.=5/8", O.D.=1-3/8", Thickness=7/16");
BulletPoint2 : Precision metric miniature ball bearing, both sides rubber sealed, pre-lubricated with grease
BulletPoint3 : Made of chrome steel (GCr15), durability and resistance to under heavy loads
BulletPoint4 : Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
BulletPoint5 : Application: Widely used in Electric Fans, Automotives, RC Cars, RC Planes, RC Helicopters, Go-Kart wheel bearing, Chain case ball bearing, Edgers and other fields.
BulletPoint6 : Fafnir:Rak-1-3/16
BulletPoint7 : Iptci:Napl206-19
BulletPoint8 : Overall Height:3.11 in . (79 mm )
BulletPoint9 : Peer:Hclp206-19
Color : Black
ExternallyAssignedProductIdentifier : 7613778469912
IncludedComponents : Deep Groove Bearings
ItemName : HiPicco 99502H-2RS Deep Groove Ball Bearings, ID 5/8" x OD 1-3/8" x Width 7/16" Miniature Bearings, Double Metal Shielded Ball Bearing Chrome Steel Z2 Lever 10pcs
ItemPackageDimensions_Height : 1.6 centimeters
ItemPackageDimensions_Length : 3.5 centimeters
ItemPackageDimensions_Width : 3.5 centimeters
ItemPackageQuantity : 10
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : Hipicco
Material : Alloy Steel
ModelNumber : 99502H-2RS
NumberOfItems : 10
PackageLevel : unit
PartNumber : H20220831128
ProductDescription :

Specification：

• Model: 99502H-2RS
• Seal Type: Double Sealed
• Inner Race/Outer Race Material: Chrome Steel (GCr15)
• Cage Material: Stamping Steel
• Inner Diameter (d): 5/8"
• Outer Diameter (D): 1-3/8"
• Thickness (B): 7/16"
• Accuracy Class: P0 (ABEC-1)
• Noise Level: Z2
• Number of Pack: 10 Pcs

Feature:

• Single-row, pre-lubricated, normal accuracy.
• Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
•  With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
• These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
•  Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

Selecting Guide:

• Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
• Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

ProductSiteLaunchDate : 2023-09-01T06:53:20.598Z
Size : 99502H-2RS 5/8" x 1-3/8" x 7/16"
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31171500