Cart 2 india

Specification
Brand : Hanrose
BulletPoint1 : 3/4" Rod End Heim Joint Kit: 3/4" Heim joint rod end:3/4" left & right-hand thread Heim joint set with tube adapters, misalignment spacer, jam nut.rubber
BulletPoint2 : Load Capacity: 28100 lbs. The Heim joints are heat treated and hard chrome plated finish to provide longer use and heavy-duty performance.
BulletPoint3 : Wide Use: The rod end Heim joint kit is great for steering and suspension, Traction bars, Sand rails, A-arms, Race cars, Rock crawlers, Steering joints, and links joints on hot rods.
BulletPoint4 : Adaptability: The rod end is with a 3/4” shaft with 16tpi. 3/4” bore is the strongest way to make this Heim. Fits Tube Size: 1 1/4" OD.x .120" Wall x 1.01"ID
BulletPoint5 : Easy to install: Our Heim joint set for the 3/4” rod end can be MiG and TIG welded with additional hardware for mating installation.
Color : Silver
IncludedComponents : no
ItemName : 3/4" Heim Joint Rod End Kit, 3/4" Chromoly Heim Joints Panhard Rod End Kit for Traction Bars Tie Rod kit LH and R H Thread Steering Joints with Spacer Tube Adapters Jam Nuts Rubber Seals(2Set)
ItemPackageDimensions_Height : 2.6 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 2.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : rod-end-bearings
Manufacturer : Hanrose
Material : Alloy Steel
ModelNumber : XM
NumberOfItems : 2
NumberOfLithiumMetalCells : 1
PartNumber : XM
ProductDescription : 3/4" Rod End Heim Joint Kit: 3/4" Heim joint rod end:3/4" left & right-hand thread Heim joint set with tube adapters, misalignment spacer, jam nut.rubber Load Capacity: 28100 lbs. The Heim joints are heat treated and hard chrome plated finish to provide longer use and heavy-duty performance. Wide Use: The rod end Heim joint kit is great for steering and suspension, Traction bars, Sand rails, A-arms, Race cars, Rock crawlers, Steering joints, and links joints on hot rods. Adaptability: The rod end is with a 3/4” shaft with 16tpi. 3/4” bore is the strongest way to make this Heim. Fits Tube Size: 1 1/4" OD.x .120" Wall x 1.01"ID Easy to install: Our Heim joint set for the 3/4” rod end can be MiG and TIG welded with additional hardware for mating installation.
ProductSiteLaunchDate : 2024-11-11T09:33:40.949Z
Size : 3/4"
Style : 2 Set
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31171500