Cart 2 india

Specification
Brand : Generic
BulletPoint : OEM MERCURY QUICKSILVER POWER TRIM SWITCH KIT 87-18286T33
BulletPoint1 : 1. Forward reverse rocker switch has 3 position: Latching ON-OFF-ON, The 'R' and 'D' position will not return back to the 'N' position after being pressed. The switch has to be hold for working. It can be horizontally or vertically mounted for rv jack, window control, turn signal light, deck lift, tilt trim, electric hoists, crane, etc
BulletPoint2 : 2. GLOW IN THE NIGHT. Golf cart rocker switch has two built-in blue LEDs which stay on when the car or boat is powered up. They can be easily found in the dark. No more fumbling around
BulletPoint3 : 3. Rated at 20amp/12v DC and 10amp/24v DC; Required mounting hole size: 37.2 mm x 21.2 mm(1.46'' x 0.83''); Face Surface Size: 49mm x 25mm(1.91'' x 0.98''); Electric life: 10000 cycles. Mechanical life: 50000. Operating temperature: -4℉ to +140℉. Waterproof rating: IP66
BulletPoint4 : 4. D N R Rocker Switch is made of high quality metal and ABS plastics(no waste material). The laser etched switch cover will not fade easily and will last a long time. We have updated the jumper wire set. It can be easily removed from the switch by pressing the clip and will not pull out the pin
BulletPoint5 : 5. Support reverse polarity. 7 Pin rocker switch 12v-24v can be horizontally or vertically mounted for all sorts of DC motor reversing applications, such as camper trailer jacks, RV Power Jack, winch controls for in/out operation, door opening/closing, lift gate up/down, winch on a lawn tractor, awning extend/retract, etc
BulletPoint6 : Protection rating: IP65 for water and dust resistance
BulletPoint7 : Connectivity protocol: X-10 for seamless communication
BulletPoint8 : Color: Black for sleek and modern look
BulletPoint9 : Mounting type: Panel mount for secure installation
CircuitType : 1-way
Color : Blue
ConnectivityProtocol : X-10
ConnectorType : Crimp
ControllerType : Rocker
ControlMethod : touch
CurrentRating : 20 amps
ExternallyAssignedProductIdentifier : 4894957027939
ExternallyAssignedProductIdentifier1 : 840415603287
ExternallyAssignedProductIdentifier2 : 0840415603287
GpsrSafetyAttestation : 1
IncludedComponents : Jumper Wires Set
InternationalProtectionRating : IP66
ItemDisplayWeight : 0.05 pounds
ItemName : D N R Rocker Switch 7Pin 12V-24V ON-Off-ON 3 Position DPDT Latching Switch, Marine Boat Heavy Duty Toggle Switch, Forward Reverse Rocker Switch with Wires for Golf Cart Kids Toy Car (Blue)
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 3 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : boating-rocker-switches
LightType : LED
LowerTemperatureRating : -25 degrees_celsius
Manufacturer : Auto&Ship
Material : Plastic
Material1 : Aluminum
Material2 : Acrylonitrile Butadiene Styrene
ModelName : IME-RPC13-127
ModelNumber : AS-1120-KG-D-N-R
MountingType : Panel Mount
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPositions : 3
OperatingVoltage : 12 volts
OperationMode : ON-OFF-ON
PackageLevel : unit
PartNumber : AS-1120-KG-D-N-R
ProductDescription :

D N R Rocker Switch for Golf Cart Kids Toy Car 12V/20A 24V/10A

7 PIN Latching ON-OFF-ON Rocker Switch;

3 Position Forward and Reverse Toggle Switch;

D N R Rocker Toggle Switch

Forward Reverse Rocker Switch with Jumper Wires

LED Lamp Color: Blue/Green/Orange/Red/White

Material: Superior ABS+PC;Rated at 12V 20A and 24V 10A DC.

Mounting Hole Size: 1.43"(37mm) x 0.84"(21.3mm).DPDT design,can control 2 loads.

--- Fits most Marine, Boat, yachts, Cars, SUV, ATV, UTV, 4X4, motorcycle, trucks, Jeep Wranglers, and other off-road vehicles.

--- Mainly used together with wiring harness to control the up/down, clockwise/counterclockwise motion of DC loads 

Such as Winch, Pump, Horn, Reclining Media Room Seats, Auto Bilge Pump etc.

1. Upper 'D' LED Illuminated

The upper light is on when the switch is pressed, and it stops working when let it off.

2. Middle 'N' Position

No lights in the middle position

3. Lower 'R' LED Illuminated

The lower light is on when you press the switch down, and it will not return off position when you remove your finger.

Installation on switch holder

7 pin rocker switch can be installed on rocker switch holder housing for better using effect.

Installation on switch panel

It can also be replaced to any defective 2-10 PIN switches. Convenient and cost-effective.

Package included : 

7 PIN Momentary rocker switch

Jumper wires set

ProductSiteLaunchDate : 2024-11-19T08:00:00.000Z
SpecificationMet : Ip65
SpecificationMet1 : CCC
SpecificationMet2 : CE
SpecificationMet3 : FCC
SpecificationMet4 : RoHS
SpecificationMet5 : UL
Style : Latching
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Rocker
TerminalType : Spade
UnitCount : 1
UnspscCode : 39122200
UpperTemperatureRating : 85 degrees_celsius
Voltage : 12 volts
Wattage : 240