Cart 2 india

Specification
Brand : RuoFeng
BulletPoint1 : Zinc plated knurled steel rivet nut
BulletPoint2 : Thread pitch: M4x0.7
BulletPoint3 : Outside diameter: 5.9mm, length: 11mm
BulletPoint4 : Drill hole size: 6mm / 7/32", sheet metal grip range: 26 - 16ga
BulletPoint5 : Head Dia: 9mm, head thickness: 0.9mm
Color : Gold
CustomerPackageType : Standard Packaging
DriveSystem : Spline
ExteriorFinish : Zinc,Carbon Steel,Steel,Metal
ExternallyAssignedProductIdentifier : 5899406079971
ExternallyAssignedProductIdentifier1 : 666354715184
ExternallyAssignedProductIdentifier2 : 0666354715184
FinishType : Zinc Plated
GpsrSafetyAttestation : 1
GradeRating : commercial
ItemName : Zinc Plated Carbon Steel Rivet Nut Flat Head Insert Nutsert Pack of 50 (M4)
ItemPackageDimensions_Height : 10.16 centimeters
ItemPackageDimensions_Length : 1.27 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 50
ItemTypeKeyword : rivet-nuts
Manufacturer : Generic
Material : Steel
MaximumShearStrength : Between 350 and 450 MPa
MeasurementSystem : Metric
MetalType : Alloy Steel
MetalType1 : Carbon Steel
MetalType2 : Alloy Steel
MetalType3 : Carbon Steel
MetalType4 : Alloy Steel
ModelNumber : 43219-61035
NumberOfItems : 180
NumberOfPieces : 180
PartNumber : 43219-61035
ProductDescription : Description:
Flat head cap screws, zinc plated surface,carbon steel rivet nut.
This Nutsert has a large flange to provide increased strength in punched and drilled holes.
Knurled body provides a higher resistance to spin out when installed in soft materials.

WHAT IS A Rivet Nut?
A Rivet Nut fastener is a tubular rivet with internal threads. It can be installed in seconds form one side of the work. Once installed, no finishing work is required on the Rivet Nut fastener. The added benefit of not only being a dependable fastener, they are ready to use with clean threads available for screw attachments.Blind thinsheet materials that are too thin for a tapped thread. Blind Rivet Nuts also areused when an application has little or no access to the backside as they can be installed from the front side of the work piece.

HOW DOES A Rivet Nut WORK?
A hand or power tool pull-up stud engages the threads of the RIVET NUT fastener and exerts a pull, causing the shank to expand tightly against the material being fastened. This step upsetting the RIVET NUT fastener.
The specific steps as following:
Step 1: Put on the rivet nut
Step 2: Spin on the rivet nut
Step 3: Insert into the hole
Step 4: Press and upset the rivet nut, withdraw the gun
Step 5: Install the svrew bolt
ProductSiteLaunchDate : 2018-09-16T21:22:17.243Z
Size : M4
Style : Metric
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 31161700