Cart 2 india

Specification
Brand : Tight Fit
BulletPoint1 : Highly compatible with a variety of sockets and wrenches with 1/4in standard hex shank, easy and practical. This adapter can be used for drilling, screwing, loosening, tightening, and more.
BulletPoint2 : Ergonomic Handle: The corner device has an ergonomic ABS handle, which will not become hot when in use. Use your current impact driving force to make contact more closely while increasing the gear strength.
BulletPoint3 : Powerful Magnet: The corner device has a built in powerful magnet, which has a good clamping force and can quickly and easily replace the screwdriver bit.
BulletPoint4 : 105° Right Angle: The 90° right angle can change the direction of the corner drill bit by 105 degrees, and can tighten the screws that are difficult to tighten normally.
BulletPoint5 : Application: The corner device is suitable for all 1/4in standard hex shank drill bits, which can be connected with electric drills or hand held wrenches, and can be stretched to a narrow space that is difficult to attain to tighten screws and nuts.
Color : Red
CompatibleFastenerDescription : 0.5 inches
DriveSystem : External Hex
ExternallyAssignedProductIdentifier1 : 022893001025
ExternallyAssignedProductIdentifier2 : 0022893001025
ExternallyAssignedProductIdentifier3 : 00853800002022
IncludedComponents : Right Angle Drill Adapter, Threaded Drill/Tool Extension, Chucking Spud, TightFit threaded shank drill bits, Screwdriver Bit Set, Threaded Collet, Threaded Countersink, TightFit Three-way Wrench
IsElectric : 1
ItemName : Tool Gift Right Angle Drill Attachment Gift Tool Kit Tight Fit 90 Degree Adapter Power Drill Attachment Accessory 00102
ItemPackageDimensions_Height : 20.32 centimeters
ItemPackageDimensions_Length : 4.318 centimeters
ItemPackageDimensions_Width : 17.526 centimeters
ItemTorque : 75 inch_pounds
ItemTypeKeyword : power-right-angle-drills
Manufacturer : EV Technologies, Inc.
Material : Steel - 1144, 12L14, 86L20 & M7
MaximumRotationalSpeed : 2500 rpm
ModelName : TOOL-001
ModelNumber : 00102
NumberOfPieces : 3
PartNumber : 00102
PowerSourceType : Manual Powered
ProductDescription : The Professional Model 00102 Kit includes: a versatile close-quarter Right Angle Drill Adapter capable of drilling up to 1/4" diameter holes and compatible with all standard power drills, a 6" Threaded Drill/Tool Extension for deep hard-to-reach spots, a Chucking Spud which allows direct use of TightFit threaded shank drill bits and extensions with your standard power drill, 12 aircraft quality TightFit threaded shank drill bits (fractional sizes: 3/32", 1/8", 5/32", 3/16", 7/32 and 1/4" in short and stub lengths), Screwdriver Bit Set (Phillips #1 & #2 and Slotted #3-4 & #6-8), a 1/4" Threaded Collet (allows tight fit use of wire wheels, rasps, sanding drums, etc.), a 1/2" Threaded Countersink, and a TightFit Three-way Wrench (1/4", 5/16" & 7/16"). The Pro Kit is packaged in a red, heavy-duty, blow-molded storage case. The Tool set can be purchased on a "Risk Free" trial basis. You will be able to make repairs and installations in near-impossible locations. Often, with its first use, the kit pays for itself in time and frustration saved. For example, the ability to drill-out a broken bolt in a tight spot can save hours. And, with care and maintenance, the kit should provide many years of trouble-free use. Suitability: for automotive, boat, home, RV, work and other repairs, installations and restorations. Note: drill bits comply with National Aerospace Standard 907B.
ProductSiteLaunchDate : 2007-07-05T00:00:00.000-07:00
Size : 7 Pcs Set
Speed : 2500 rpm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 20111700
Voltage : 110