SpecificationBrand : Notch
BulletPoint1 : 1/2" (13mm) Sterling Tech 125 sewn eye positioning lanyard featuring Notch triple action snaphook
BulletPoint10 : Fastener hardware kit included
BulletPoint11 : Order block pulley (3511063), lifeline (Cable Assembly) and counterweight separately (3511598) separately
BulletPoint2 : Abrasion-resistant sheath and cut resistant materials make this lanyard strong and rugged, yet supple enough to move and position easily
BulletPoint3 : Notch snaphook is rated at 30kN with 0.78" (20mm) Gate Opening and has a unique triple action gateway for increased safety
BulletPoint4 : 15 foot length. Also available in 10-foot length
BulletPoint5 : 350 ft (107 m) rescue and descent kit with rescue wheel, 4 ft (12m) anchor sling, 2 carabiners and carrying bag
BulletPoint6 : For industrial/occupational use only. Not for consumer sale or use
BulletPoint7 : Mounting bracket for SSB climb assist system
BulletPoint8 : Fits square rungs up to 9/16-inch and round rungs up to 3/4-inch diameter per side
BulletPoint9 : Extremely rugged and corrosion resistant galvanized construction
CareInstructions : Hand Wash Only
Collection : All
Color : Tan/Green
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 723466955911
ExternallyAssignedProductIdentifier2 : 0723466955911
ExternallyAssignedProductIdentifier3 : 00648250167649
ExternallyAssignedProductIdentifier4 : 0662459355492
ExternallyAssignedProductIdentifier5 : 00662459355492
FabricType : Polyester
FinishType : Galvanized
ImportDesignation : Made in the USA
IncludedComponents : 15' Lanyard w/Triple Action Snap
ItemDisplayDimensions_Height : 0.9 inches
ItemDisplayDimensions_Length : 187 inches
ItemDisplayDimensions_Width : 2.2 inches
ItemName : Notch Tech 125 15' Lanyard w/Triple Action Snap (62001)
ItemPackageDimensions_Height : 23.8 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 20.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : fall-arrest-restraint-ropes-and-lanyards
Manufacturer : Notch
Material : Nylon
ModelName : Notch Tech 125 15' Lanyard w/Triple Action Snap (62001)
ModelNumber : 3327350
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 3327350
Pattern : Solid
ProductDescription :
Engineered Supply's weld-on plate anchor has a durable hot dipped galvanized finished. It is used for permanent application for fall protection, fall restraint, and suspended maintenance loads in any climate on structural steel building structures. Made by certified welders in the United States, this plate anchor is built to meet and surpass building code allowable stresses. The large anchor hoop, made from 3/4" diameter high-strength steel allows for ease of connection and lower side-gate loading. The anchor hoop is inserted into holes in minimum 1/2" thick top plate and then welded for maximum capacity.
This is a hot dip galvanized ANSI Z359.18 Type T anchorage connector designed to support a suspended component/tie-back line or for an active fall protection system.
This sale includes the rated anchorage connector, prepared for welding.
The overall height is 1/2" plate, plus 2" clear, plus 3/4" hoop = 3.25"
These are commonly installed on structural steel. They are called welded plate anchors, roof anchors, fall protection anchors, anchor points, and sometimes davits (although davits is not the dictionary term).
For fall protection, in addition to what this sale provides the installer will need at minimum:
1. A competent qualified person to verify the location, verify the base material can support the loads, and inspect the installed anchorage connector and a Certified Welding Inspector (CWI) to inspect the welds per AWS D1.1.
2. A certified welder for installation with a 200v single phase or higher source power dc welding machine with E7018 electrodes, and common welding tool set including grinder, chipping hammer, wire brush, leads, fire extinguisher, water bottle, welding blankets, and touch up paint.3. A qualified roofer with flashings, as necessary.
For rope descent and tie-back, in addition to what this sale provides the installer will need at minimum:
1. A licensed engineer to verify the location, verify the base material can support the loads, perform site verification load testing, inspect the installed anchorage connector, and provide record documentation for the system users and a Certified Welding Inspector (CWI) to inspect the welds per AWS D1.1.
2. A certified welder for installation with a 200v single phase or higher source power dc welding machine with E7018 electrodes, and common welding tool set including grinder, chipping hammer, wire brush, leads, fire extinguisher, water bottle, welding blankets, and touch up paint.3. A qualified roofer with flashings, as necessary.
Engineered Supply, our design branch Engineered Design, and our subcontractors depending on project location are available to fully support our anchorage connectors with options for layout, custom detailing, supervised installation, load testing, and certification for additional fee.
ProductSiteLaunchDate : 2023-02-24T14:29:01.360Z
Size : 15'
Style : Quick Connector for Harness Mounting
SupplierDeclaredDgHzRegulation : not_applicable
TargetGender : unisex
UnitCount : 1
WarrantyDescription : Lifetime warranty against defects in materials & workmanship