Cart 2 india

Specification
Brand : AXEON
BulletPoint1 : Offers high quality product water
BulletPoint2 : Can operate as low as 50 psi, while producing more water than competing membranes
BulletPoint3 : 98 percent nominal salt rejection
BulletPoint4 : Produces 150 gallons per day
BulletPoint5 : Made from polyamide thin-film composite
BulletPoint6 : Lifetime: It is recommended to replace the filter cartridge every 4-6 months, depending on the quality of the water and the sediment levels present. A good indicator that the filter needs replacement is when the color of the water darkens, or the water flow slows down.
Color : Blue
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 785577139628
ExternallyAssignedProductIdentifier2 : 0785577139628
ExternalTestingCertification : NSF
GpsrSafetyAttestation : 1
ItemDisplayDimensions_Height : 1.81 inches
ItemDisplayDimensions_Length : 11.75 inches
ItemDisplayDimensions_Width : 1.81 inches
ItemDisplayWeight : 0.55 pounds
ItemName : Axeon TF Series Polyamide Thin Film Composite Home Drinking Water Reverse Osmosis Membrane, 150 GPD Permeate Flow Rate, 2-11 pH Range
ItemPackageDimensions_Height : 30.48 centimeters
ItemPackageDimensions_Length : 4.318 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : replacement-undersink-water-filtration-filters
Manufacturer : Axeon Water Technologies
ManufactureYear : 2020
Material : Polyamide
ModelName : WD-KJF
ModelNumber : TF-1812-150
NumberOfItems : 1
NumberOfPieces : 2
PartNumber : 200362
ProductBenefit : Provides high quality filtration and increased water production at lower operating pressures
ProductDescription : This GE Standard Size Reverse Osmosis Membrane TFM-24 fits in a standard membrane housing. The same standard membrane can accommodate RO membranes with capacities ranging between 18-100 gallons per day (GPD). Average NaCl Rejection: 98% Permeate Flow @ 65 PSI 24 GPD Specifications are based on 500 mg/L NaCl solution at 65 psi net pressure (4.1 bar), 77°F (25°C), 15% recovery after 24 hours. Individual element flux may vary ± 15%. If you would like to change your membrane to a capacity other than what was originally in your Reverse Osmosis System, you must change the drain flow control also. The membrane and drain flow restrictor are sized to go together. ---Pre filter Class 1 Chlorine, Taste & Odor Reduction Made with Premium Quality Coconut Shell Activated Carbon 5 Micron Filtration No Release of Carbon Fines Fits all Standard 10" Filter Housings, Reverse Osmosis Systems (including all H2O Filter Warehouse, Watts, Pentek & Hydrotech) and Under Sink Systems 5,000 Gallon capacity @ 1 PPM Chlorine with 98% chlorine removal at end of cartridge life. Flow rate: 1 GPM Cartridge is designed for use in Under Sink Filtration & Reverse Osmosis Applications, but not for whole house applications. NSF Certified under manufacturer's part # CBC-1010AAC. ---Post filter Class 1 Chlorine, Taste & Odor Reduction Made with Premium Quality Coconut Shell Activated Carbon 1 Micron Filtration No Release of Carbon Fines Fits all Standard 10" Filter Housings, Reverse Osmosis Systems (including all H2O Filter Warehouse, Watts, Pentek & Hydrotech) and Under Sink Systems 5,000 Gallon capacity @ 1 PPM Chlorine with 98% chlorine removal at end of cartridge life. Flow rate: 1 GPM Cartridge is designed for use in Under Sink Filtration & Reverse Osmosis Applications, but not for whole house applications. NSF Certified under manufacturer's part # CBC-1010AAC.
ProductSiteLaunchDate : 2011-09-03T07:00:00-00:00
Size : 1 Count (Pack of 1)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40161502