Specification Brand : MLWSKERTY BulletPoint1 : Replacement only, other accessories in the picture is not included! BulletPoint2 : To install replacement insert the new assembly into the cartridge at a slight so the hook at the end of the fits into the slot in the cartridge body. The assembly s BulletPoint3 : Recommended needle pressing 1.5g-2g, can be adjusted according to preference. BulletPoint4 : There are four wiring marks at the end of the singing head: R+, R-, L-, L-. Generally speaking, the wiring color of the end of the record player is: r + = red, R-= green, L + = white, L-= blue. BulletPoint5 : Note: Non-original without do not if you mind Color : Blue ExternallyAssignedProductIdentifier : 7626610730248 ItemName : 1pc Needle for Gramophone ATN3600 ATN91 AN11 ST40EPS43 for ATN2003 ATN2004 ATN2005 ATN2002 ItemPackageDimensions_Height : 0.83 inches ItemPackageDimensions_Length : 2.17 inches ItemPackageDimensions_Width : 1.77 inches ItemPackageQuantity : 1 ItemTypeKeyword : dj-turntable-cartridge-replacement-needles Manufacturer : JLnase3 Material : sapphire and plastic ModelName : Replacement Cartridge Needles ModelNumber : 40LD27E09O5 PartNumber : JLnase3 ProductDescription : 1pc Needle For Gramophone ATN3600 ATN91 AN11 ST40EPS43 For ATN2003 ATN2004 ATN2005 ATN2002
Features: and Note Non-original without do not if you mind To remove old (needle), hold the cartridge in hand, grasp the housing with thumb and forefinger, and pull away from the cartridge. The assembly comes away at a slight To install replacement insert the new assembly into the cartridge at a slight so the hook at the end of the fits into the slot in the cartridge body. The assembly s There are four wiring marks at the end of the singing head: R+, R-, L-, L-. Generally speaking, the wiring color of the end of the record player is: r + = red, R-= green, L + = white, L-= blue. Recommended needle pressing 1.5g-2g, can be adjusted according to preference. Replacement only, other accessories in the picture is not included!
Specifications: tem Type: Replacement
Size tail height: 5mm/0.19in, width: 6mm/0.23in Color: White Output 4.2m V Frequency Response: 20Hz-20Khz Two-channel separation: 1kHz/10kHz : 24/15dB Tracking Force: 1.5g-2.5g (Can be adjusted according to your requirement) Available turntable models (among others) for AIWA PXE860, for Aiwa PX-E860/PXE880/PX-E880, for LP60 USB/LP60/AT-PL50/LP2DA/LP2DUSB , for Crosley CR249, for DP-29F, for So-ny PS-LX250H, for Teac P988/P-A688 Quantity: 1 PC
Interchangeable models: for AT3601 / AT3650 / AT3651 / AT91, ATN200, ATN2002, ATN2003, ATN2004, ATN2005 for AN11 for – RS82, APN1 for Daewo Dar-ling – DL32E for DN235 for Sinbang – HT302 B for ST7 for – MD1055Z / MD1055E, DT55, DT55 / II, DT55B for 25130071 for EPS43 STSD for DN68ST, DN61, DN68 STE