Cart 2 india

Specification
AudioOutputMode : Surround
Brand : Sewell
BulletPoint : Are you pointing the remote at the receiver?|Does the remote have fresh batteries?|Is only one device turning blue?|Are both devices turning blue but nothing is happening?|The following devices are known to be incompatible.|Yamaha HTR 6140|Arris DCX 3520E-M|OSD ATM-7 Speaker Selector device|SW-32988 Kit|SW-32988-RX Receiver Only |SW-32988-TX Emitter Only |SW-32988-X Transceiver|Wireless Distance: 200m (650 ft.) distance may vary due to obstacles|IR Receiver Distance: 7m (30 ft.)|IR Frequency: 20-60Khz|RF Frequency: 915 Mhz|Wirelessly communicates in the 915-917 MHz band|Power: 5V/0.5A|Optional Cables Included: 3 ft. receiver cable and 10 foot. dual head emitter cable|Blu-Ray Players (Sony LG Samsung Panasonic Yamaha)|Cable and DVR Boxes (U-Verse Dish VIP Fios Xfinity DirecTV Motorola Cisco Optimum TIVO)|AV Receivers (Denon Sony Onkyo Yamaha Samsung Bose LG Marantz)|Logitech Harmony Hub and Universal Remotes|Anything else that requires an IR signal! If your device does not work let us know which device and we will pay for any return shipping|Yamaha HTR 6140|Arris DCX 3520E-M|OSD ATM-7 Speaker Selector
BulletPoint1 : 【HD wireless transmission from Type-C To HDMI】: supports wireless transmission of picture/presentation/video/audio from a USB Type-C device, eg. a laptop or tablet, to an HDMI display apparatus, such as smart TV or projector, resolution up to 1080P@60Hz, ideal for conference, home entertainment and multimedia education.
BulletPoint2 : 【No Lagging and Anti-interference】: operates at frequency 5GHz with strong anti-interference ability, supports point-to-point connection, allows transmission distance up to 45 feet (15 meters), ideal for streaming video and audio from YouTube TV, Netflix, Hulu TV, Amazon Prime and other media streaming devices.
BulletPoint3 : 【Plug and Play】: just plug the mini transmitter into USB Type-C device and the receiver into the display apparatus to play, no need to wire or connect wifi, no need to install any driver or software, no need to use other power charger.
BulletPoint4 : 【Upgrade Version】RAM Dual core chipset, H.265/HEVC Decoder, support 4K(3840 X 2160) and 1080P resolution, No Need Switching in Miracast Airplay DLNA Modes. Anycast M100 mirrors the entire screen of your mobile device(iOS and Android device) on HDTV /Projector/Monitor wirelessly.
BulletPoint5 : Compatible with Inteset Model INT-3856-WRLS Single Channel Wireless Units when in Channel 0. Unit Dimensions 2" x 1.25" x 0.5". Weight is 1 oz. One year warranty.
BulletPoint6 : Premium Design with a Metallic Touch: Crafted from high-quality aluminum, its sleek silver-gray finish adds a touch of elegance to your workspace.
CircuitType : 1-way
Color : Black
CompatibleDevices : Home Theater
CompatibleDevices1 : Cellular Phones
CompatibleDevices2 : Laptops
CompatibleDevices3 : PC
ConnectivityTechnology : HDMI
ConnectivityTechnology1 : Infrared
ConnectivityTechnology2 : Radio Frequency
ConnectorGender : Male-to-Female
ConnectorType : IR
ConnectorType1 : HDMI
ConnectorType2 : USB Type C
ControllerType : Ring
ControlMethod : remote
CurrentRating : 0.5 amps
CustomerPackageType : Standard Packaging
DataTransferRate : 38 KHz
ExternallyAssignedProductIdentifier1 : 685289029883
ExternallyAssignedProductIdentifier2 : 0685289029883
ExternallyAssignedProductIdentifier3 : 00685289029883
FinishType : Abs
FormFactor : TV Stick
Frequency : 38 KHz
IncludedComponents : Wireless Transmitter
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
InternationalProtectionRating : IP00
ItemName : Sewell BlastIR Wireless Pro Transceiver Remote Control Extender (IR Receiver and Emitter in one)
ItemPackageDimensions_Height : 11.6078 centimeters
ItemPackageDimensions_Length : 5.8928 centimeters
ItemPackageDimensions_Width : 11.6078 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : audio-video-remote-control-extenders
LightType : Non-Illuminated
LowerTemperatureRating : -69 degrees_celsius
Manufacturer : Sewell Direct
Material : Plastic
MemoryStorageCapacity : 16 GB
ModelName : IOGEAR
ModelNumber : SW-32988-X
MountingType : Surface Mount
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPins : 2
NumberOfPorts : 1
NumberOfPositions : 1
OperatingVoltage : 5 volts
OperationMode : ON-OFF-ON
OutputPower : 50 watts
PackageLevel : unit
PartNumber : INT-BIDI-WRLS
PowerPlugType : type_c_2pin_eu
ProductDescription : Control all of your home theater video sources (Blu-Ray player, Cable box, TiVo, and anything else that uses a standard IR remote control) from behind walls or closets by extending the IR signal with this kit. How this works This kit comes with an IR Receiver, and an IR Emitter. Simply point your remote control at the Receiver, and it will send the signal wirelessly to the Emitter which will then transmit that signal to the devices you wish to control. Multi-zone Control This kit can be combined with other BlastIR Wireless Kits to create custom setups. It supports up to 10 "zones" with independent sending/receiving frequencies. (kind of like different channels on a walkie-talkie). You can change the zone by using a very small rotating switch located at the bottom of the receiver and emitter pucks. The Receivers will only communicate with the Emitters that are set to the same zone. There are multiple ways to use the BlastIR Wireless PRO. Some setup examples are: One to one, All to All, One to Many, or Many to One. You can also purchase extra Emitters, or Receivers individually if you don't need an extra full pair. One to One All to All One to Many Many to One Extend Reach with IR Emitter and Receiver Cable (Optional) You can use the included Receiver and Emitter cables so further minimize what's seen on your setup. The emitter cable is a "Dual-headed" Emitter so it allows you to control an additional two devices. Magnetic Feet and Adhesive pads are also included to mount the BlastIR Wireless out of sight when using the IR Receiver and Emitter Cables. Troubleshooting If you already have a BlastIR Wireless PRO and need help setting it up, watch this video or check out the troubleshooting tips below. Also, feel free to call us at (800) 709-1345 and we'll help you set it up over the phone. Is it receiving power? Make sure the unit is plugged in completely and receiving power. Once the power cord is plugged in, the light should briefly turn blue when the device turns on, then turn blank, turning back on only when it receives a remote signal. Are the units too far apart? The intended range between units is around 600 feet and should work around walls and through closed doorways, though the more obstacles there are, the more limited this range becomes. Is each device in the proper spot? The receiver (blue-ringed device) should be next to the TV (or where you want to send the signal from). The emitter (orange-ringed device) should be next to the cable box or the device you want to control. Are you using the proper cord for each device? You will want to make sure that the ring of color on the cord and device match in color. Are you receiving a signal? If the device is not turning blue when you point the remote at it and press a button, it is not receiving a signal. Here are a few things to check: Are you pointing the remote at the receiver? Make sure that the device you are trying to send a signal to is the receiver (blue-ringed device). Does the remote have fresh batteries? Replacing the Batteries can increase the remote signal strength to help the repeater to have a stronger signal to send. Is only one device turning blue? Make sure both of the units are on the same channel. The dial on the bottom side of the device should point towards a number. Changing the number changes the channel they are operating on. This number should be the same on both devices. Are both devices turning blue, but nothing is happening? Try using the Emitter cable included with the package. It is teardrop-shaped and has two heads; you may have to try a couple of times, but finding the IR eye of your device and placing one of the heads in front of it can greatly boost reliability. The following devices are known to be incompatible. Yamaha HTR 6140 Arris DCX 3520E-M OSD ATM-7 Speaker Selector device Interference: The device is to have a blue signal only when it receives a signal from your remote. If it is constantly blue, that means it is receiving interference from a nearby device. The most common culprit for this has proven to be a Mesh network. If it is turning blue constantly, distancing it from nearby devices, and changing the channel the BlastIR units are operating can be helpful. See how your feedback has improved this product 7/28/17 Increased compatibility with Dish and Cisco boxes Many people use the BlastIR Wireless with their current cable box. Every time we hear a report about a cable box (or any other device) not working with the BlastIR Wireless, we get to work on making the device compatible. This update helps those with a Dish or Cisco box. 6/1/18 Increased compatibility with Explorer, Spectrum, and Samsung boxes Further widening the range of compatibility of the BlastIR Wireless. This update helps those with Explorer, Spectrum, or Samsung boxes. 6/1/18 Increased font size in manual We found that the text size in the manual was simply too small. It has been enlarged throughout the manual to better use the space and make it easier to read. 8/30/18 Included magnet feet With the release of our new Magnet Feet, we have decided to include two in every BlastIR Wireless box. A magnet foot is simply an adhesive rubber "dot" with a magnet embedded inside. After placed on the bottom of the BlastIR Wireless "puck" you can place it on metal surfaces such as the back of your TV or the TV mount itself. This could also keep the unit in place in your equipment cabinet or rack. We have also included a page in the manual to describe this. Specifications Part Number SW-32988 Kit SW-32988-RX Receiver Only SW-32988-TX Emitter Only SW-32988-X Transceiver Specifications Wireless Distance: 200m (650 ft.), distance may vary due to obstacles IR Receiver Distance: 7m (30 ft.) IR Frequency: 20-60Khz RF Frequency: 915 Mhz Wirelessly communicates in the 915-917 MHz band Power: 5V/0.5A Optional Cables Included: 3 ft. receiver cable and 10 foot. dual head emitter cable Compatibility Blu-Ray Players (Sony, LG, Samsung, Panasonic, Yamaha) Cable and DVR Boxes (U-Verse, Dish VIP, Fios, Xfinity, DirecTV, Motorola, Cisco, Optimum, TIVO) AV Receivers (Denon, Sony, Onkyo, Yamaha, Samsung, Bose, LG, Marantz) Logitech Harmony Hub and Universal Remotes Anything else that requires an IR signal! If your device does not work, let us know which device and we will pay for any return shipping Incompatibility Yamaha HTR 6140 Arris DCX 3520E-M OSD ATM-7 Speaker Selector Package Contents Each unit comes with the appropriate IR cables, power supply, and mounting accessories. Downloads BlastIR Wireless PRO Manual.pdf
ProductSiteLaunchDate : 2019-08-28T18:26:42.208Z
RecommendedUsesForProduct : extending the range of IR signals in home entertainment systems
Resolution : 1080p
Resolution1 : 1080p
Resolution2 : 720p adapted
Size : 15m/50ft (Type C to HDMI)
SpecificationMet : CE
SpecificUsesForProduct1 : Television
SpecificUsesForProduct2 : Monitor
SpecificUsesForProduct3 : Projector
StreetDate : 2016-10-25T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SupportedInternetServices : Netflix
SupportedInternetServices1 : youtube
SupportedInternetServices2 : netflix
SurroundSoundChannelConfiguration : 5.1 or 7.1
SwitchType : Push Button
TerminalType : Blade
TotalHdmiPorts : 1
UnitCount : 1
UnspscCode : 52161500
UpperTemperatureRating : 165 degrees_celsius
VideoCodec : h.264
VideoOutputResolution : 1920x1080 pixels
WarrantyDescription : 1 Year Replacement
WirelessCommunicationTechnology : RF
WirelessCommunicationTechnology1 : IR
WirelessCommunicationTechnology2 : RF