uxcell G1/2 Male Thread Air Vent Valve Brass Air Release Valve 39mm Outer Diameter Bleeder Valve

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 4200/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
AutoPartOrientation : drivers_side
Brand : uxcell
BulletPoint : Pressure relief with stainless steel ball. PSI range: 0-300. Inlet/Outlet: 3/4". Floating stainless steel ball or Nitrile/Buna washer allows for automatic adjustment to pressure variations. Spring controlled relief pressure ranges up to 600 PSI. T-Handle permits quick adjustments to higher or lower pressures.
BulletPoint1 : [Buoy Material] The buoy of the exhaust valve uses low-density PPR material. It will not be deformed even if it is immersed in high-temperature water for a long time. It will not cause difficulty in buoy movement.
BulletPoint2 : [Main Part Material] The main part of the valve is brass, which is not easy to rust and corrode.
BulletPoint3 : [Function] A controller installed in the system architecture to release the cavitation generated in the heating system and water supply pipeline.
BulletPoint4 : [Easy to Use] It is convenient to disassemble and maintain.Meanwhile,the water in the system will not flow out.
BulletPoint5 : [Application] Widely used in water distributors, radiators, floor heating, air conditioning and water supply systems.
Color : Silver
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 0731515739559
ExternallyAssignedProductIdentifier2 : 731515739559
FitType : Vehicle Specific Fit
ItemName : uxcell G1/2 Male Thread Air Vent Valve Brass Air Release Valve 39mm Outer Diameter Bleeder Valve
ItemPackageDimensions_Height : 10.8966 centimeters
ItemPackageDimensions_Length : 4.699 centimeters
ItemPackageDimensions_Width : 7.8994 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-relief-valves
Manufacturer : uxcell
Material : Brass
ModelNumber : 9C2815
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : a20011400ux1194
ProductDescription : Features:
1.The buoy of the exhaust valve uses low-density PPR material. It will not be deformed even if it is immersed in high-temperature water for a long time. It will not cause difficulty in buoy movement.
2.The main part of the valve is brass, which is not easy to rust and corrode.
3. It is a controller installed in the system architecture to release the cavitation generated in the heating system and water supply pipeline.
4.It is convenient to disassemble and maintain.Meanwhile,the water in the system will not flow out.
5.Widely used in water distributors, radiators, floor heating, air conditioning and water supply systems.

NOTE:

1.The automatic exhaust valve must be installed vertically. It must ensure that the internal float is in a vertical state, so as not to affect the exhaust.
2.When installing the automatic exhaust valve, it is best to install it together with the partition valve, so that when the exhaust valve needs to be removed for maintenance, the system can be sealed and water will not flow out.
3.The automatic exhaust valve is generally installed in the pipeline where the system is easy to collect gas, such as the highest point of the system and the highest point of a section of pipeline, which is conducive to smooth exhaust.

Specification:
Material: Brass, PPR
Color: Brass Tone
Thread Size: G1/2 (approx thread OD 20.9mm)
Size: 75 x 39mm / 2.95 x 1.54 inch(L*OD)

Package Content:
1 x Air Vent Valve
ProductSiteLaunchDate : 2020-11-18T04:00:36.804Z
Size : G1/2
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : air release valve

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.

1 2 3 4 5