Cart 2 india

Specification
Brand : NorCal Brewing Soutions
BulletPoint1 : 1.5" Tri Clover / Tri Clamp connection. Works great with Ss BrewTech Chronical fermenters
BulletPoint2 : Allow CO2 or other gas into the vessel through standard Ball Lock connection
BulletPoint3 : Pressure Relief Valve (PRV) helps prevent over-carbonation, fermentation gas bleed-off
BulletPoint4 : Standard 1/4" FFL connection on underside. Attach any flared connection Oxygen Stone, etc.
BulletPoint5 : Made in USA by NorCal Brewing Solutions
Color : Stainless Steel
ExternallyAssignedProductIdentifier1 : 0750439051165
ExternallyAssignedProductIdentifier2 : 750439051165
IncludedComponents : /
ItemDisplayDimensions_Height : 2 inches
ItemDisplayDimensions_Length : 2 inches
ItemDisplayDimensions_Width : 2 inches
ItemDisplayWeight : 4.5 ounces
ItemName : NorCal Brewing Solutions 1.5" Tri Clover/Tri Clamp Ultimate Corny (Cornelius) Gas In with Pressure Relief Valve (PRV)
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-relief-valves
Manufacturer : NorCal Brewing Solutions
Material : 304 Stainless Steel
ModelName : Main Relief Valve
ModelNumber : 3710
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 3710
PowerSourceType : Hydraulic Powered
ProductDescription : NorCal Brewing Solutions Ultimate Ball Lock “Gas In” with Pressure Relief Valve 1.5” Tri Clover Connection. 304 Stainless Steel. Features a 1/4" FFL x 19/32" - 18 pitch Threaded Plug Adapter. Allows thread connection of any 1/4" MFL threaded device (such as a flared connection Oxygen Stone) into the underside of the Tri Clover Cap WITHOUT affecting the Pressure Relief Valve. Stainless steel Ball Lock “Gas In” adapter provides Ball Lock Gas In through a 1.5” Tri Clover connection. Built-in Pressure Relief Valve (PRV) helps protect the vessel in case CO2 regulator is cranked too high, or CO2 builds up inside vessel due to spontaneous fermentation. This item works GREAT with the Chronical line of Ss Brewtech / Brewing Technologies fermenters! Does NOT work with the BrewMaster series of Ss Chronical fermenters (they have a 3” Tri Clover port at the top of their lid). CHARACTERISTICS and SPECIFICATIONS: · 304 Stainless Steel for all metal components · Use at the TOP of the fermentation vessel · Standard 1/4" FFL threaded connection on underside · Use 1.5” Tri Clover clamp (not included) and gasket (not included) for sanitary, leak-free attachment · Use with a standard “Gas In” Ball Lock (not included) to quickly connect and disconnect CO2 source · Comes apart for cleaning and poppet replacement just like any standard ball lock post. PLEASE NOTE: The last picture shows a flared oxygen stone, and how it would connect to this item. Oxygen Stone is for illustration purposes only, and is not included. PLEASE NOTE: Pressure Relief Valve is set to approximately 5 pounds of pressure when it leaves our warehouse. You can increase the pressure by tightening the spring on the valve. USE CAUTION! We make no claims as to how high the pressure can go before vessel damage or human injury occurs.
ProductSiteLaunchDate : 2016-09-29T07:00:00.000Z
Size : 1.5"
SupplierDeclaredDgHzRegulation : other
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 35.274
UnspscCode : 40141600